At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Based on the engine number (KX085CE009452), it appears that your KX85 engine is a 2000 model year. Here's how we can break down the code:
KX: Identifies the model as a Kawasaki KX dirt bike.
085: Indicates the engine displacement as 85cc.
C: Represents the year code, with "C" corresponding to 2000.
E: Denotes the engine type (not applicable for determining the year).
009452: Serial number specific to your individual engine.
Therefore, you should be looking for a crankshaft compatible with a 2000 Kawasaki KX85 engine when searching for a replacement.
Search online parts databases: Several online platforms allow you to search for parts using the engine number and filter by year. However, double-check the information with a reliable source before purchasing.
The engine will fit in the frame but the head support will not bolt up. The timing is also very different on these two years. The heads would have to be switched, including the cams, so unless you are a seasoned mechanic I think you should avoid this one.
The main 30a fuse is located on the battery tray. Take off the fuel tank cover, the seats and the battery compartment cover (which is part of the frame. Pull battery tray out slightly and disconnect the negative wire the engine start wire from bottom of tray and disconnect the harness white connectors, slide tray out and remove cover at the opposite end and fuse will be under the cover.
This engine is made for a "Self Servicing OEM" That means I can not get information on the exact spec of the model you have but I looked up a different spec that has the same basic hardware. This engine has an igniter. Call a local shop like www.arcolawn.com or order online the kawasaki
Im not to familer with te zx12r, but if you are springing oil leaks it could be down to over pressure in the crankcase/engine. Check all your breather hoses are not obstructed or kinked (normally a large diameter rubber hose that goes from the engine to the airbox.
I am guessing you have already changed the cluch cover gasket? Im afraid they will need changing if you want an oil tight engine.
To change oil remove drain plug under bike, while oil is draining into pan remove left lower fairing and remove oil filter from front of engine. Replace plug and filter and refill, replace fairing.
What is the tires that come on a stock 2003 Kawasaki zx12r?
×