Question about 1996 Suzuki VS 1400 Intruder

1 Answer

1996 Suzuki VS 1400 Intruder the turn signal and brake light not working

The turn signal and brake light have stopped working. I had a power surge that blew out all the lights I replace all the lights and still no turn signal or brake light. What could be the problem the fuse is ok. @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Suzuki Master
  • 59,789 Answers

Hi, Dlamuir for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.intruders-alert.com/viewtopic.php?t=5797
https://www.volusiariders.com/60-help/221675-brake-light-won-t-work.html
Suzuki Intruder VS1400 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
Suzuki VS1400 Owner Manual

Posted on Mar 11, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 116 Answers

SOURCE: brake light does not work

remove the bulbs step on the brake and ck for power at the terminals inside the socket if no power back track the wires and look for a break in the wires.use a didgital volt meter and ck for continuity through the switches( unplug the switch and put the probes to both terminals one on each the meter should beep ---switch good.........
no beep switch bad) also ck the bk. light relay ,not sure where it is at....more extensive problem ??? the dealer sells service the manual with all the wireing diadrams and locations of the components all u need to fix any thing on u bike .....my 82 honda saber had lots of electrical prob's & lighting prob,s i bought the service manual and fixed every thing... saved me hundreds o $$$$$$$$$$$$
let me know

Posted on Dec 20, 2008

MakisRC51

MakisRC51

  • 408 Answers

SOURCE: My signal lights, hazard lights, and tail light aren't working.

Check the rear bulbs.If they are working (brakes+lights) check the wires.For the turn signals, override the flasher relay.If they are coming on then you need to replace the relay.If not then check the left hand side clip on switch.

Posted on Jun 04, 2009

Anonymous

  • 65 Answers

SOURCE: suzuki k6 turn signal and park light dont work

This is either a ground issue or 2 separate problems. Check the tail bulbs there should be 2 filaments in them unless they are LED. In the case that they are led Check the grounds and the fuses.

Posted on Jul 08, 2009

Anonymous

  • 83 Answers

SOURCE: no working lights on 2000 suzuki gsx 600 katana (electrical)

IF EVERYTHING ELSE IS OK, SOUNDS LIKE YOUR IGNITION SWITCH COULD BE GOING BAD.

Posted on Oct 22, 2009

D. Fueliner

  • 121 Answers

SOURCE: 2003 Suzuki VL 800 speedo cluster, signals, brake

Did you also check the system fuses? The fuse box is located behind the left side crankcase cover above the coolant reservior.

The 15 amp Signal fuse protects the coolant temperature light, the turn signal indicator light, the neutral indicator light, the oil pressure light, horn, brake/taillight, postition light and turn signal light. Basically, if this fuse is blown, your cluster will be inop.

Please let me know if this is helpful.

Posted on Aug 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Only middle brake light works


I would expect to find the problem is the turn signal switch. The third brake light power does not go thru the switch.
You would need to check the circuit in and out of the turn signal switch for power.

Feb 19, 2014 | Dodge Stratus Cars & Trucks

1 Answer

Nissan Xterra Brake Light Fuse Location


Hi, you need to test if the power is coming to the plug for rear brake light. If the power is not there that is your first problems. Also may have earth wire problem.

Jul 20, 2013 | Nissan Xterra Cars & Trucks

5 Answers

98 chevy lumina Rear window break light works, but rear break lights don't, also right turn don't work?


I can almost 100% guaranty the turn signal switch is the problem. Power for the brake lights starts at the brake switch. power then splits from there and the third brake light gets power directly from the brake switch. Since the turn signal and the brake lights are on the same bulb power for the brake lights is routed through the turn signal switch. the switch depending on what position it is in will allow brake power or turn signal power to there respective left or right brake/turn bulbs.

If you hold your foot on the brake pedal and wiggle the turn signal and or play with the hazard switch the brake lights will almost always intermittently start to work. this will confirm a bad turn signal switch which is pretty common on GM vehicle with this style setup.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Apr 05, 2013 | 1998 Chevrolet Lumina

2 Answers

I have a 2000 chevy 2500 and the tail lights, tag lights and brake lights have stopped working, I checked the bulbs and they are good, fuses are good. Have not replaced the brake relay under the hood. Do I...


check for power at the wires going intop the tail lights, real common that the circuit board is bad, but unlikely both at the same time. The tag, tail lights and brakes are 2 different systems. Do the turn signals work normally? if so the wiring from the turn signal switch to the brake lights is GOOD. the stop light switch had\s a ORANGE wire that should have 12V if not ck STOP LPS fuse, when brake pedal is depressed, the WHITE wire is 12V (at the stop light switch) if that is OK, the turn signal switch COULD be bad. The wiring harness plug is near the back left under the tailgate, see if that is disconnected?

Aug 04, 2011 | 1999 Chevrolet K2500

1 Answer

I replace my brake switch & my light don't work? when i stop


IF THE FUSES INSIDE THE CAR & UNDER THE HOOD HAVE ALL BEEN CHECKED WITH A GOOD FUSE TESTER, & THE BRAKE LIGHT SWITCH REPLACED, THE TURN SIGNAL SWITCH IS NEXT. THE BRAKE LIGHTS GO THROUGH THE TURN SIGNAL SWITCH SO THEY CAN BE USED AS TURN OR BRAKE LIGHTS. I'M ASSUMING THE BULBS ARE OK. REMOVE THE PLASTIC FROM AROUND THE TURN SIG. SWITCH. STAY AWAY FROM ANY WIRES THAT ARE IN THE YELLOW SLEEVE. THEY ARE AIR BAG WIRES. WITH BRAKE PEDAL DEPRESSED, THERE SHOULD BE POWER IN THE WHITE WIRE. IF THERE IS NO POWER IN THE WHITE WIRE, YOU MAY HAVE TO PUT A BYPASS WIRE FROM THE WHITE WIRE COMING OUT OF THE BRAKE LIGHT SWITCH TO THE WHITE WIRE GOING INTO THE TURN SIGNAL SWITCH. IF THAT DOESN'T MAKE THE BRAKE LIGHTS WORK, THE TURN SIGNAL SWITCH MUST BE BAD.

Jan 26, 2011 | 1999 Chevrolet Malibu

1 Answer

Have a 1999 Chev. Suburban. Problem is with brake lights. Top panel (on roof) works but neither side panel works. Replaced circut boards in tail lights, new bulbs, and all fuses are good. What next?


WITH A GOOD FUSE TESTER, TEST ALL THE FUSES FUSEBOX UNDER THE HOOD & INSIDE THE VEHICLE. IF THE FUSES ARE ALL GOOD WITH THE TESTER YOU MUST HAVE A BAD BRAKE LIGHT SWITCH OR A BAD TURN SIGNAL SWITCH. THE BRAKE LIGHT CIRCUIT GOES UP THROUGH THE TURN SIGNAL SWITCH & THEN TO THE BRAKE LIGHTS. FIRST OF ALL IS THE BRAKE LIGHT SWITCH GOOD ? THE ORANGE WIRE FEEDS THE BRAKE LIGHT SWITCH, THE WHITE WIRE PUTS POWER TO THE TURN SIGNAL SWITCH, SO THE LIGHTS CAN BE USED AS TURN LIGHTS OR BRAKE LIGHTS. , PUT A TESTER IN THE WHITE WIRE & PRESS ON THE BRAKE PEDAL. IF THE TEST LIGHT LIGHTS UP, BRAKE LIGHT SWITCH IS GOOD, BY THE WAY THE BRAKE LIGHT FUSE MAY BE LABELED" STOP", THE FUSE LABELED" BRAKE" IS FOR THE ABS SYSTEM. TO CHECK THE TURN SIGNAL SWITCH FOR BRAKE LIGHTS, REMOVE THE PLASTIC COVER FROM UNDER THE STEERING WHEEL, PRESS ON THE BRAKE PEDAL, PUT THE TESTER IN THE SMALL YELLOW WIRE, THEN THE SMALL GREEN WIRE. IF THERE IS NO POWER IN EITHER WIRE, THE TURN SIGNAL SWITCH IS BAD.

Jan 11, 2011 | 1999 Chevrolet Suburban

1 Answer

Braking lights and turn signals not working


Did you check the brake and signal light bulbs? If something happened that blew a fuse, chances are you probably lost some bulbs too. that should fix your problem

Oct 20, 2009 | 1999 GMC Yukon

1 Answer

1995 cutlass ciera stop light and third light don't work


THE 3RD BRAKE LIGHT DOES NOT GO THROUGH THE TURN SIGNAL SWITCH.ASSUMING THE 3RD BRAKE LIGHT BULB IS GOOD.U SHOULD CHECK THE BRAKE LIGHT SWITCH ON THE BEAKE PEDAL.SHOULD BE POWER GOING IN & POWER OUT WHEN U ARE IN THE BRAKE

May 13, 2009 | 1995 Oldsmobile Cutlass Ciera

2 Answers

1969 ford mustang mach 1 brake / stop light switch challenge


Most tail light problems are a result of a bad ground......somewhere.

Sep 16, 2008 | 1966 Ford Mustang

Not finding what you are looking for?
1996 Suzuki VS 1400 Intruder Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...