Remove the two bolts that hold the rear brake caliper into the rear brake caliper support bracket. Lift off caliper. Notice how the pads and anti-vibration clips are positioned in the rear brake caliper support bracket. Install new pads and anti-rattle clips or springs.
Now, using a large C-clamp or a large pair of slip joint pliers, depress piston all the way back into the caliper. Carefully reposition the caliper back on the rear brake caliper support bracket without disturbing the pads or clips. Install the two bolts and torque to 25 foot pounds of torque. Slowly depress and release the rear brake pedal until a good firm pedal is obtained. Check the brakes for proper operation prior to riding the bike. Failure to properly service the brakes can cause sever injury or death.
667 views
Usually answered in minutes!
×