At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, the spark plugs are located inside spark plug tunnels which are through the valve cover. 2007 nissan Sentras are equipped with individual coils for each plug. So to get to them, first remove all the plastic coverings over the valve cover. 10mm socket and 1/4 inch rachet with a 6 inch extension should do the trick. Before disconnecting electrical parts please disconnect the battery. Remove wiring looms for coils. Remove bolts for coil packs, lift coils out of tunnels. Spark plugs are down inside the tunnels. Use the proper sizing for plug removal. A 3/4 inch rachet with deep spark plug socket and 6 inch extension should get them out. When replacing spark plugs, thread them by hand first, usually a good 2 or 3 full turns and be careful not to over tighten. The plugs screw into the alluminum cylider head. Alluminum is soft and you can quickly ruin the threads. Installation is the reverse of removal.
The spark plugs are located inside spark plug tunnels which are through the valve cover. 2007 nissan Sentras are equipped with individual coils for each plug. So to get to them, first remove all the plastic coverings over the valve cover. 10mm socket and 1/4 inch rachet with a 6 inch extension should do the trick. Before disconnecting electrical parts please disconnect the battery. Remove wiring looms for coils. Remove bolts for coil packs, lift coils out of tunnels. Spark plugs are down inside the tunnels. Use the proper sizing for plug removal. A 3/4 inch rachet with deep spark plug socket and 6 inch extension should get them out. When replacing spark plugs, thread them by hand first, usually a good 2 or 3 full turns and be careful not to over tighten. The plugs screw into the alluminum cylider head. Alluminum is soft and you can quickly ruin the threads. Installation is the reverse of removal.
with a spark plug socket, goto autozone, walmart, oreillys, etc and ask for a spark plug socket... You can also just use a thin wall deep socket, there are several different sizes of spark plugs...
×