this 17 years old a good run. nothing new here on failures this old.
all car fail that is what they all do eventually. (entropy etc)
let me guess never fails in others hands
and scans show nothing wrong, but sure too late then, they are gone.
so is and engine problem, so we focus there.
engines (gas, in order fail for 3 ways)
- engine is bad, or cat melted (no) and egr stuck open (no)
- bad spark (fuel can not burn lacking spark so why skip #2?)
- bad fueling. too much or too little
in that order,
not enough evidence stated.
RPM's sink on start sometimes dies then usually it catches itself, idles high a few seconds then lines out.
runs great hot engine, so I guess fails only cold engine.
so bad spark plugs, bad spark coil boots or bad COPS
or bad CKP or CMP
why not just put in new plugs and new boots,
17years old those are NEVER GOOD.
ENGINE IS: 3.0L 2v or 4v (means 6x2 =12valvs or 6x4=24vavle heads.???? it has COPS, coil over plugs(spark)
6 cops ,6 new spark plugs and 6 new boots.
or learn now scan and drive,
or scan in the morning dead cold as the RPM go nuts
and does it misfire going nuts the RPM> misfire is spark first
or flooding 2nd the cold fast idle speed is wrong (IAC)
all I here is almost STALLS at cold start means why below 800 rpm hot and 1500 rpm cold so stalling is what MISFIRE?
can you prevent the too low RPM and stall with fast right foot action?
I say bad spark if not bad spark that is leaking injector or pair
learn to listen and feel for misfire,
and to use the right foot , adding throttle extra air to make it burn clean. Misfire s mostly violent. felt , heard, and see if you view the engine shack.
that is all I have but scanning it failing is how you fix cars
nobody can fix working car delivered a work car...
I have scan tool that logs and then play them back and bingo
GOTCHA. (P0306, and number 6 injectors is bad) see?
×