i have an older honda 300 4 by 4 sometimes it starts and runs fine and sometimes it will not start but let it sit for 20mins and it will start most of the time when this happens there is no fire going to the spark plug.what could be the problem and how can i fix it?i have an older honda 300 4 by 4 sometimes it starts and runs fine and sometimes it will not start but let it sit for 20mins and it will start most of the time when this happens there is no fire going to the spark plug.what could be the problem and how can i fix it?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would check the return spring on the kick crank. It has to fully return the kick crank. If this is a coil spring it has probably been off at some time and was not wound enough at the re-install.
Have you tried replacing the spark plug?...Put a new one in it anyway - you ELIMINATE a problem very inexpensively!
Do you have gas in it?
Is there gas in the float bowl? There is a screw or bolt in the very bottom of the carb float bowl, loosen it and gas should flow out freely. If not. there is the first problem I would get repaired.
Keep me posted and if this doe not fix it, we'll try other options.
Do the nut up until the wheel stops spinning, then back it of 1/2 to 3/4 of a turn, the nut should still be contacting the washer, fit the split pin from there, the wheel should spin freely.
i have an older honda 300 4 by 4 sometimes it starts and runs fine and sometimes it will not start but let it sit for 20mins and it will start most of the time when this happens there is no fire going to the spark plug.what could be the problem and how can i fix it?
×