Here is the wire digram hope it helps
Factory in-dash wire harness (this vehicle has a 2 pc harness)
that snaps into the factory radio
Black Plug
Gray Plug
Radio Wire & Color Code Information Page 2 of 2
Typical Dodge/Chrysler Typical New Radio
Pin What It Is In Dash Wire Color Equivalent Wire Color
A Right Rear Spkr (-) Blue w/ White Stripe Purple w/ Black Stripe
B Left Rear Spkr (-) Brown w/ Yellow Stripe Green w/ Black Stripe
C Right Front Spkr (+) Purple Gray
D Left Front Spkr (+) Dark Green White
E Right Rear Spkr (+) Blue w/ Orange Stripe Purple
F Left Rear Spkr (+) Brown w/ Blue Stripe Green
G Power Antenna/Amp White (use for Infinity Radio) Blue
H +12 Volt Battery Wire Pink or Pink w/ White Stripe Yellow
I +12 Volt Ignition Wire Red w/ White Strip Red
J Radio Dimmer Wire Do Not Use
K Headlight Dimmer Wire Do Not Use
L Right Front Spkr (-) Blue w/ Red Stripe Gray w/ Black Stripe
M Left Front Spkr (-) Brown w/ Red Stripe White w/ Black Stripe
N No Wire
Metal Braid Or Plastic Connector Attached To Back Of Radio Is The Ground Wire
1,386 views
Usually answered in minutes!
I am using an adapter harness. All the wires are hooked up. the 4 speakers that don't come on are the infinity amplifed speakers. there is one black with a green line wire that comes from the speakers. it grounded on the back of the factory radio. and when I hook up the factory radio and plug in the black/green line wire the amped 4 speakers do come on. But when i hook up the kenwood and ground the black/green line wire it doesnt come on. Not sure what to do next. I know on a regular amp the music gets fed through rca cables. But how does it work in this case with just one black/green lined wire? Thank you so much for your help.
are you using an adapter harness? there could be an amp turn-on wire that needs power or ground, usually black/white (ground); blue/white or blue (power). what four are working?
×