- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi! sims146
The Green wire from the electric motor is ground. Check the compressor motor, make sure it is wired for 220-230 Volts. If it has a white wire it could be wired 120 Volts. There should be voltage and current ratings on the motor plate. I always double check these connections. At 230 Volts this motor should be 17 Amps full Load. A 25-30 amp fuses are required to protect this motor circuit. Otherwise up to a 42.5 Amp Inverse Time Delay Breaker could be used.
The welder circuit should have 230 Volts between the Red and Black wires. The white wire is Nutral / Ground. Hopefully this is a 30 to 40 Amp circuit. The Four prong air compressor outlet, White is Neutral, Black and Red 230 Volts, Gray should be ground. Please check with Voltmeter, as some times people swap colors.
InMrFixIt
This is the wiring codes 2005 Dodge Ram 1500 Truck Car Radio Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Pink Car Radio Accessory Switched 12v+ Wire: Brown/Red Car Radio Ground Wire: Black/Dark Green Car Radio Illumination Wire: Orange/Dark Blue Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger: N/A Car Stereo Amp Trigger Wire: Dark Green/Red Car Stereo Amplifier Location: Located behind the glove box. Car Audio Front Speakers Size: N/A Car Audio Front Speakers Location: N/A Left Front Speaker Positive Wire (+): Dark Green Left Front Speaker Negative Wire (-): Brown/Red Right Front Speaker Positive Wire (+): Violet Right Front Speaker Negative Wire (-): Dark Blue/Red Car Audio Rear Speakers Size: N/A Car Audio Rear Speakers Location: N/A Left Rear Speaker Positive Wire (+): Brown/Yellow Left Rear Speaker Negative Wire (-): Brown/Light Blue Right Rear Speaker Positive Wire (+): Dark Blue/White Right Rear Speaker Negative Wire (-): Dark Blue/Orange
OK on the truck side, brake controller harness wire colors are:
RED = +12V (Hot at all times, even with truck off) RED/GREEN = Stop light (Hot when brake pedal is depressed) BLACK = Ground BROWN/WHITE = Brake out (variable voltage to trailer brakes, 2v-12v) RED/BLUE = Dimmer (not used on most controllers)
On the controller side (these are pretty much universal):
BLACK = +12v RED = Stop light WHITE = Ground BLUE = Brake out
Start at the headlamp wiring just match the color coded wires together. black wire to black/blue to blue/ red with green strip to same the multi plugs only will fitits marching plug Etc,
test wires, white u need supposed to be ground, and usually two of the other wires is hot mostlikely red green attach only 2 hot wires if 3rd is hot cap it, home depot also sells basic wiring book that will guide you through this issue
I have a 2005 CRF230F and I am able to get up to 70+mph without all the aftermarket stuff on it. I hear the 03-08 are pretty much the same and all very indestructable and bad-***. Love my bike, its a great all-around bike (trails, sand, street, track) would never sell it!!!
left ashould be blue(+) blue w/black strip(-)right should be green(+) and green w black strip(-) thes are for front rear are left(purple(+) purple w/black strip(-) right gray(+) grey w/black strip(-)
×