Lost keys lost both keys to my 2007 cbr 1000rr. can anyone instruct me how to remove the ignition switch so i can get a key made?

I found this

You can't reset the HISS.

All the HISS does is take note of the code from a specific key. You can make it recognise up to four keys but you need to have one of those keys first to be able to get into the system to add another key.
If you don't have any key that works then you will have to replace the ECU and key with a new matched set.
Or you can get a non-HISS ECU from the US.

https://www.google.com/search?q=2007+honda+cbr+1000rr+hiss+security+system

..

Question edited for clarity.
Question moved to model category.

You need to reset the security system so that the ECM recognizes the new key.

https://www.google.com/search?q=2007+honda+cbr+1000rr+reset+security+system


..

0.9mm

correct spark plug for the 94 cbr1000f - CBR Forum ...

https://cbrforum.com > ... > CBR 1000F "Hurricane"

Jul. 11, 2007 - I stopped at a motorcycle shop to get new plugs and the guy tells me that the manufacturer (Honda) recommends a DRP8EA spark plug. Spark Plug Gap - CBR Forum - Enthusiast forums for Honda ...
Jul. 6, 2010
Correct Spark Plug - Enthusiast forums for Honda CBR Owners
Apr. 23, 2017
spark plug removal - Enthusiast forums for Honda CBR Owners
Apr. 25, 2017
Spark plug gap - CBR Forum - Enthusiast forums for Honda ...
Jan. 7, 2007
More results from cbrforum.com

I need to know the sparkplug gap size for a 1990 honda cbr ...

https://www.fixya.com > ... > 1990 CBR 1000 F

Jun. 1, 2012 - Initially, for a no spark concern on a 1990 Honda CBR1000F, checks would be on: presence of ignition +12 on the black/white wires to the ... 1996 honda cbr1000f plug gap - Fixya
Mar. 24, 2012
SOLVED: What is the spark plug gap for a 1987 honda - Fixya
Aug. 1, 2014
More results from www.fixya.com

Spark Plug Gap... ' Honda CBR 1000RR Forums

https://www.1000rr.net > ... > Maintenance

Oct. 11, 2007 - I can't find the download manual at this time, does anyone know what the gap should be?:owned: Spark Plug Gap Question ' Honda CBR 1000RR Forums
Jul. 22, 2009
Spark Plug Change, now wont start. ' Honda CBR 1000RR ...
Mar. 8, 2015
Rim swap rotor fitting ' Honda CBR 1000RR Forums
Jul. 29, 2018
No Spark plugs avail anywhere in North Jersey?? ' Honda ...
May 11, 2013
More results from www.1000rr.net

then it has to be one of two things only....a blown fuse or a broken wiring.
or if you dumped the bike you might have tripped the bank/tilt sensor.
i believe to reset it turn key on and cycle kill switch the turn key off then try to start..im not to sure as hoe to reset it but you could always try disconnecting the battery for a couple of minutes that might reset it.

The back corners of the riders seat are soft and can be bent up to expose the screws that hold it to the frame.

Hi and welcome to FixYa,

Initially, check would be to determine if the fuel pump is priming.

Offhand, if the fuel pump is not working at ignition ON, possibilities are:

• wiring, fuse, connector (least likely);
• fuel pump, fuel relay (likely); or
• bank angle sensor (most likely).

On the other hand, if the pump is working, then check for the absence / presence of spark at the plugs.

Good luck and thank you for asking FixYa.

check your key it has a chip in side it and it may be faulty try your spear and i know it sounds silly but just make sure your kill switch is set to run check the hiss fuse under the seat also swap your fuel pump relay with the fan one the fuel pump relay has brown wires going to it and the fan has black and blue if you have an alarm on it it will be worth checking that make sure that the fuel pump is pluged in under the tank take a look at the hiss light does it go out wen the bike is switched on if it stays on you have a HISS problem any problems let me know and i will do my best to help

http://www.carlsalter.com/motorcycle-manuals.asp

get a free pdf service manual for your bike here. you should find out how to remove the ignition. or if you have a seat lock that is easier to remove take that to a locksmiths to get new key cut

Hi there!

here are some recommended torque for small nuts and bolts:
Torque Specifications of Small Screws
Screw Size/Torque (in.-lb)

2mm 5-7
2-56 6-8
2.5mm 8-10
4-40 10-12
5-40 11-13
3mm 12-14
6-32 15-17
4mm 18-21
8-32 19-23
5mm 20-24
10-32 22-26

Also, click on the link below and you'll never have to find torque settings for your motorcycle bolts. I use this as a reference all the time.

http://img399.imageshack.us/img399/4280/ac43131btable71torquevalues9cn.jpg


Hope this helps!