SOURCE: 93 artic cat jag head torque pattern and specs
the best place to find it is the service manual. if not avail. i usually 1, tighten it to ~10-20Nm in a 'outwards spiral' fashion, ie start tightening from centre bolts outwards. 2, spiral tighten by 1/4 turn, 3, another 1/4 turn, and 4, final 1/4 turn.
SOURCE: need torque specs for 98 yz 250,rebuilding engine
Go to the site below and you can download a free srevice manual for your bike.
http://www.carlsalter.com/motorcycle-manuals.asp
Top rating due on this answer!
SOURCE: im rebuilding my warrior
if your using the old bolts, 35 ft/lbs. if new bolts, 25 ft/lbs. that will work just fine.
SOURCE: i have a 99 fzr 600 anyine know what the head
advise that you seek correct info from dealer as there will be a correct sequence and possible torque down and secondary torque settings.which means that after initial settling of head the bollts may require a second tweak.its not very common but there sre bikes that require this.
SOURCE: dont know the torque settings for the clutch bolts
Refer to a shop manual.Ask dealer or independent shop to look values up.Look up on the I net.Need to find "specification - torque values" from some source.Anyone out there have a shop manual?
1,082 views
Usually answered in minutes!
×