Suzuki burgman an400 speedo not working

the 'ears' have broken off of the composite speedo rotor. you can drill two small holes no bigger than 2mm and insert some plasic pins and then build up with two part repair stuff like Nural 27 or Areldite and when hard file to make new ears. Make sure the ears are located in the wheel slots before assembly. the 'ears' have broken off of the composite speedo rotor. you can drill two small holes no bigger than 2mm and insert some plasic pins and then build up with two part repair stuff like Nural 27 or Areldite and when hard file to make new ears. Make sure the ears are located in the wheel slots before assembly.

i drilled 2 2mm holes ware the lugs had broke off and countersunk the inside with 5mm drill bit
then from the inside i used 2 small panel pins cut to the correct sise and then araldite on the outside let it set for 20 mins reassenble and bingo perfect i drilled 2 2mm holes ware the lugs had broke off and countersunk the inside with 5mm drill bit then from the inside i used 2 small panel pins cut to the correct sise and then araldite on the outside let it set for 20 mins reassenble and bingo perfect