What is the fork oil capacity on my K7 2007 Suzuki DL650 V Strom. Please specify springs in or out. would prefewr to leave em if if possible? Cheers Steve

Question edited for clarity.

RM85 Fork Specs. Bound to be the same forks

When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
? 09943-74111: Front fork oil level gauge
? Fork oil level (Standard): 124 mm (4.88 in)
? 99000-99001-SS5:SUZUKI FORK OIL SS-05
? Standard fork oil capacity (each leg): 351 ml
or an equivalent fork oil
(11.86/12.36 US/lmp oz

Free Service manual for the RM85

https://www.manualslib.com/manual/824675/Suzuki-Rm85.html?page=164&term=fork+oil&selected=1#manual

Lots of Service Manuals for around $34

https://www.ebay.com/itm/385931112664?hash=item59db4970d8:g:WyUAAOSwkFpj2-n~

More here.

https://www.google.com/search?q=1986+suzuki+rm80+service+manual

..

Question moved from Cars and Trucks

This seems the best guide I can find.

https://www.vstrom.info/Smf/index.php/topic,7061.0.html

https://www.google.com/search?q=2019+Suzuki++V-Strom+DL650%2C+error+codes


..

The service manual specifies a level and quantity. 192mm (7.56 inch) from the top of the fork tube with the spring removed and fork compressed. The quantity should be 416mL (14.1oz)

The following site has some DL650 manuals and they can be downloaded for free. The site has over 3000 manuals so the list may take a minute or so to build. Even if the manual downloaded is a year or two off, the service procedures will be the same. Cosmetic changes are the usual differences year to year. www.carlsalter.com/motorcycle-manuals.asp Please rate my answer. Thanks.

FORK OIL
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
tube.
 Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz)
 99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent fork oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
 09940-52841: Inner rod holder
NOTE:
Refill front fork oil up to the top of the outer tube so that bubbles
are visible while bleeding air.
• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
NOTE:
* Always keep oil level over the cartridge top end, or air may
enter the cartridge during this procedure.
* Take extreme care so as to pump out air completely.
• Hold the front fork vertically and adjust fork oil level with the
special tool.
NOTE:
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
 Fork oil level: 153 mm (6.02 in)
 09943-74111: Front fork oil level gauge

5w is standard but a good mod is ---- 20wt fork oil
stiffer springs (the stock sv650 springs are ridiculously soft)
Racetech Emulators

413ml ( 14/14.5 us/imp oz ) each leg with springs removed

good luck

buddy no it wouldnt because the fork may fit but the spring rates and the oil capacity will change the riding conditions you can make it the same by getting the same springs and settng the same oil amount but will take a bit off work to do so i will just by the same one buddy hope this helped

My repair manual and local shop specify 15-16 oz per tube. weight can be changed to suit your ride quiality preferences.

http://www.tradebit.com/filedetail.php/4569751-suzuki-dl-650-v-strom-2004-2008-service-repair.
just copy it and you can get the manual for 7.49 USD.