Adjust the timing 2007 Kawasaki KLR250 Ninja

Gino Cussen

• 217 Answers
• Posted on Mar 23, 2009

SOURCE: timing marks

Try here, it is spanish but you just want diagrams ?
http://www.blackbears.ru/manual/files/Kawasaki_ZZR600_'90-92_Service_Manual_(Spanish).zip

SOURCE: how does a 2002 kawasaki ninja 250r act if the clutch isnt adjust

if there is no free play when pulling the lever in, the bike will most likely take off from first gear, but when you throttle it, the clutch will most likely slip. if the lever is to loose, lots of free play, you may have a hard time getting it in gear. approx 1/4 inch free play with the lever and it will work normal... unless its ready for a new clutch. hope this helps...

SOURCE: how to remove front fairing 250 kawasaki ninja

there are small allen bolts or lock screws.. take them out and it should just come off

SOURCE: would the fairing parts of a 2006 kawasaki ninja

Yes I do believe they do. Try going to Powersportseast.com Look in the shopping section on the left of the homepage. You will want to use the parts fische and load the info for your bike. It allows you to see what the dealer parts counter can see. See if this helps. I'm pretty sure the 250 ninja really didn't change until 2008 when it got the BIG overhaul

Testimonial: "Thanks Fixya"

SOURCE: I have a 2010 Kawasaki Ninja 250 and looking at

The exhaust is about all you can do and a K&N air filter. Those 250's are tweek pretty much to the limit from the factory.