At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The valve tappet clearance for the Mazda Bongo Brawny can vary depending on the specific engine model and year. Here are some general specifications for the different engine types:
2.0L FE engine: Intake valve clearance - 0.18-0.22mm, Exhaust valve clearance - 0.28-0.32mm
2.5L WL engine: Intake valve clearance - 0.20-0.25mm, Exhaust valve clearance - 0.30-0.35mm
2.5L RF engine: Intake valve clearance - 0.20-0.25mm, Exhaust valve clearance - 0.30-0.35mm
It's important to note that the valve tappet clearance should be checked and adjusted by a qualified mechanic using the correct specifications and tools. Incorrect adjustment can cause engine damage and poor performance.
Valve Clearance Specifications
Application
Specification
Metric
English
Cold
Intake
0.15 +/- 0.02 mm
0.0059 +/- 0.0008 in
Exhaust
0.2 +/- 0.02 mm
0.00787 +/- 0.0008 in
Hot
Intake
0.25 +/- 0.02 mm
0.0098 +/- 0.0008 in
Exhaust
0.3 +/- 0.02 mm
0.0118 +/- 0.0008 in
There is a specific procedure for setting valve clearance . I highly recommend getting a repair manual for the correct specs & procedure. The engine must be at TDC with the #1 cylinder on the compression stroke , that will allow you to adjust ONLY certain valves , then you have to turn the engine one turn to TDC again only now #1 will be on the exhaust stroke & the rest of the valves can be adjusted . it's important that you know the difference between the two !
The tappet clearance for your Hyundai Atos 2007 would be:
• Valve clearance Warm: 0.2 mm intake, 0.25 mm exhaust.
• Valve clearance Cold: 0.1 mm intake, 0.17 mm exhaust.
make the engine runs for about 30minutes before adjusting the valves, valve clearances: intake valve = 0.20mm(0.008 in) exhaust valve = 0.25mm(0.010 in) for reference only when the engine is cold, valve clearances: intake valve = 0.25mm(0.010 in) exhaust valve = 0.30mm(0.012 in) engine specs: mitsubishi 4g13 1.3L (if you have same engine)
×