I installed led tail and brake lights on 08 street glide and now it wont start & speedo & tach are dead. is TSSM bad?
Did you check the on/off switch. Sometimes on Harley electric start switch doesn't work unless one keeps the finger pushing down on it as the other finger pushes the start.
?? Now, if that doesn't work try switching fingers.
The TSSM will not cause these symptoms. I would suggest you start from the beginning of the work you done. If the bike was operating correctly before the work was started, then for sure you have done something incorrectly. Check all fuses as is one of these is blown due to incorrect wiring, then the supply to the clock/tack could be compromised.
SOURCE: lights bulbs in tach and speedo
The tach and speedo are their own separate unit. There is no changeable light bulb. You may want to check your light and instrument fuses. If those are working, I would remove the outer fairing and check the connections to your tach and speedo.
SOURCE: Check engine light comes on for about 10 secs. after starting
Its a self diagnostic,,,, the check engine light should stay on for a few seconds and then go out ....as long as it doesnt come back on ....u are A OK !
SOURCE: 2007 street glide misses and wonts to stall out when taking off??
my roadking just did the same thing, check the gasket between carb and intake
SOURCE: changed handle bars on 2009 flhx street glide -will not start
I would be inspecting the kill switch. Only thing on the bar that could be it other than the start button.
SOURCE: how to change tranny fluid on a 08 street glide
No offense, but you really need a service manual to learn which drain plug to remove to change the Trans fluid, there are three under there, two for oil and Transoil change the other is to be left alone. AFAIK, things change from model year to model year.
254 views
Usually answered in minutes!
×