Need the torques specs for the 2 nuts on the clutch on a harley

Duplicate question already answered

Duplicate question already answered

Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://www.motorcyclespecs.co.za/model/h-d/harley_davidson_fxdc_dyna_super%2007.htm
http://www.mediafire.com/file/6cp9fbatnw1z4di/2005+Harley+Dyna+Service+Manual.pdf
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/dyna-super-glide-custom-2005-owners-manual-66388
https://www.6ya.com/ to speak to me personally

Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://www.hdforums.com/forum/dyna-glide-models/627122-front-fork-axle-nut-torque.html_Dyna_Service_Manual_2003.pdf/file
http://www.mediafire.com/file/65e9i0e80baqvhz/Harley-Davidson_Dyna_Service_Manual_2003.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://mybikemanuals.com/harley-davidson/harley-davidson-dyna-glide-owners-manuals/
https://www.6ya.com/ to speak to me personally

Clutch hub nut, left-hand thread, couple drops 262 loctite (red) to last few threads, 70 - 80 ft-lbs.

Crankshaft nut, right-hand thread, couple drops 262 loctite (red) to last few threads, 150 - 165 ft-lbs.

No, it's the CLUTCH HUB NUT that has a left hand (reverse) thread.

The COMPENSATOR NUT is a standard right hand thread.

Tighten inspection cover screws (13, 14) to 84-108 inlbs (9.5-12.2 Nm). in a cross pattern

50-60 foot pounds.

you may be able to find service manual at tradebit.com