SOURCE: how can i increase my top speed
when you put your bike in gear dont be hurry and gradually increase the grip. As per the bike taking motion in same rame increase grip.
It is the best technique to increase speed.
SOURCE: I want to buy new bajaj pulsar 150 dtsi shock
It must be around 600-1000 for one. Actually you dont need to install new. local mechanics ll fix it.
SOURCE: K & N oil filter for bajaj pulsar 180 dtsi - UG3......
how much engine oil is requird for the pulsar 180
SOURCE: Hi, I own a Pulsar 150
First and formost make sure air filter is clean.Then start bike and warm up engine.with engine warm adjust idle screw(the big screw with spring around it)Turn clockwise to increase and counterclock wise to decrease.with bike idling properly the low speed air adjustment screw (small screw located just above fuel bowl on side of carb)Adjust in small increments 1/16 turns at a time till bike has smooth throttle responce.This screw contols air flow during idle and up to 1/4 throttle.From 1/4 throttle and up the needle setting on plunger inside of carb takes care of 1/4 and up.You usally dont have to mess with needle unless you do upgrades to get more power out of bike.But over time the low speed settings can change due to wear on idle needle and air needle.So thats why you have to make adjustments.If bike still dosent respond or idle correctly I would purchase carb rebuild kit and your problem will be solved.
SOURCE: self starter not working in
if engine doesnot self start even at neutral then its a big issue othervise if it dosent start at ang gear while holding the clutch .. then it id due to an open circuit problem..... which is not a big one..just look below your clutch lever you will find a switch, just open it and clean it with a cloth and petrol..and refix it ..boomyour problem will be solved
102 views
Usually answered in minutes!
×