Lost key and don't have key number - 2002 kawasaki Super Sherpa

You can't , anti-theft system an computers won't let you . Your best bet ,call a mobile lock smith an have a new key cut an programmed to the computers .

https://www.aa1car.com/library/troubleshoot_antitheft_system.htm

The dealer probably is looking for a key number that came with the bike when it was newly purchased. If you are not the original owner then you probably don't have that number. If anyone know where that number is, it would be the dealer (they could tell you). More than likely the best thing to do is to remove the ignition switch and take it to a lock smith and they can most likely make you a key. Removing the ignition switch may not be that easy because sometimes they have special theft proof bolts in it that need a special driver to remove (ask your dealer). The only other thing that you can do is buy a complete lock set from the dealer or froma salvage yard but that is not always cheap.

I have lost IMEI No.(Shows - 12345610654321?) Green dial key + 3 key + * Star key + Star key + swich on - system couldn't able. Pl. help me through email ([email protected])

Sorry, but we are not a warez site.. We don't give out activation keys or password codes.

Hi Duffy, You'll need to get new keys and have them re-encoded. The encodement center will require the chassis number of your vehicle as some of the numbers are for the encodement. Come on....don't blame the kids, who left them where the kids could get them anyway? Regards John

I am glad to HELP YOU!

If you don't have the key you cannot install the operating system [which I assume it's about a Windows XP].
This case you have to options:
1. ask from the manufacturer [Microsoft] a REPLACEMENT CD because you have lost the initial one [assuming you've BOUGHT the previous one...!];
2. buy another installation CD.

There are some FREE software that help you to get your product key but for each one apart you have to have THE OPERATING SYSTEM INSTALLED already on your computer.
A list is HERE.


GOOD LUCK!
... and don't forget to RATE, please...
********************************************

! Windows Tips

Xp sp2

wcbg6-48773-b4byx-73kjp-km3k3

V2C47-MK7JD-3R89F-D2KXW-VPK3J

RHKG3-8YW4W-4RHJG-83M4Y-7X9GW

try using either of these apparently they are universal keys for xp or xp pro i have not tried any so i cant gaurantee that they will work but i no that you can buy a coa on Ebay for $15 or Oztion.com for $5.50 aus

hope this helps
don

You need to contact sentry.

LOST KEYS

For starview super box

Press MENU

Press 1570

Go to NAGRAVISION and press OK

Go to Key Number with the arrows on your remote, press two times to the right. Now you should have 00 again

Go Key Data and enter this code: B0 B8 4F 04 E6 5F 87 80 and press OK.

Go back to Key Number and press arrow to change to 01

Than go back to Key Data and enter code: A3 EB EC 07 06 49 D2 EB and press OK.

Last step: press EXIT 3 times. Your channels should be now restored.

Ps. Make sure to install all numbers and letters of the code don’t over look any of them for this will cause problems reinstalling your channels