Motorcycles Logo

Related Topics:

My Gilera SC 125 seems to be getting too much oil in the gas. Sometimes it's hard to start and we need to change the spark plug? Any idea? Regards Svein

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hi I have stripped mi Gilera 125 sc down apart from engine and carb. Just panels and petrol tank. Why they have been painted. Now it has a good spark fuel but will not start just seems plug is...

It sounds as though the mixture is way too rich. Is the choke stuck on or malfunctioning? With is dry spark plug but fuel in the carburetor, try turning the fuel valve and choke off and then with ignition on and holding the throttle at least 1/2 open, kick the engine over several times. If it starts under these conditions then perhaps the float(s) in the float bowel have leaked and are full of gasoline causing the fuel to flow continuously into the throat of the carb then into the engine. It probably is some sort of carb mixture setting, choke or needle valve/float problem.
1helpful
2answers

Gilera runner 125 st 2008 cuts out by arcing

coil lead plug cap needs replacing , no shield to protect spark plug from getting wet due to weather/water splash. electrical spray lubricant requires from damp start problem
0helpful
1answer

Does the gilera sc125 have a oil filter?

The Gilera SC125 does not have an oil filter, the two stroke oil from the oil tank lubricates the engine by injection into the inlet with the petrol. The oil in the engine is only for the gearbox and clutch. If you want to change this drain it by removing the drain plug underneath the engine, refit the plug and refill with the correct quantity of motorcycle gearbox oil or good quality engine oil. do not use an EP rated oil or the clutch will slip.
1helpful
1answer

2008 gilera vx 125, changed the spark plug and

first thing to check is all the wiring for any damage or incase something has just come unplugged before getting the cdi unit checked and is the ignition switch in good condition??
0helpful
1answer

Gilera runner sp 50 2003 wont start

Sounds like your oil/ fuel mixing valve may need to be replaced. New gaskets for it at least. Hopefullly your engine gaskets are ok, that's the first thing I thought of until I saw it was a 2 stroke.
Not finding what you are looking for?

61 views

Ask a Question

Usually answered in minutes!

Top Gilera Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66919 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Gilera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...