- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Change engine and tranny oil. Check tire pressure and tire tread depth, for cuts etc. Clean air with compressed air or replace air clean. Check bike over all for loose parts. GO FOR ARIDE :)
There could be a number of things going on here. First check your oil level if it is lower than normal you could have a sumping issue going on here. Next is to pull your air filter off so you can see your injectors, turn the ignition on and off 5 or 6 times to make sure your injectors are not leaking. While you have the air filter off look inside the throttle body with the trottle plate open and see if the IAC pintle is moving in and out when you turn the ignition on and off.This only controls cold ilde. If all is good you will have to reset the TPS.
With the power commander on it you will need to hook up a laptop with the program for your bike and what mods it has and set the throttle posistion from idel to wide open throttle.
Sounds like your flooding it out with the choke out. Try the next time you go to start the bike when it's cold with the choke out and when it starts push the choke all the way in and keep it running with the throtle. If it runs better after doing this then your flooding it on start up. Use 1/2 choke to start cold and see what it does. Good Luck
×