SOURCE: oil change on my 1990 fzr yamaha 1000
20/50 shouold be fine oil drain plug is under the belly pan
SOURCE: left front for leaking on 1993 yamaha fzr 600
hi buddy add 440mls of medium fork oil to it and go onthis site to show you how to strip them http://www.motorcyclistonline.com/howto/replace_fork_seals/index.html
Testimonial: "thanks for your help very helpfull"
SOURCE: oil
my old cbr takes 3 quarts 3.5 if filter changed...i always check it with wheel stand so it will be level when checking and i never screw in the cap i just set it inside, and never top it off only go 3/4 of the way...you dont ever want to overfill any motor engine with oil...better to be a little low and have to add then have internal damage....10w40 would put be a good choice, no synthetics. the next years summer months you could go up to a 20w40 if you want. I'm not sure if your model has a view port or dip stick..well just pour two quarts directly no problem then slowly pour in the third look in there with a flashlite if i"ll help and when you see it get close set it at a nominal level..remember dont overfil. then just remember how many quarts it took to fill it for next time.
Can i get a helpful reply...thanks!
SOURCE: what kind of oil do i need to put in my 1991
Any motorcycle oil will do. Castol or motul are good ones. Don't use oil for cars as the antiwear aditives will make your clutch slip. Synthetic oil is good. I use the motul ester 20w50 in my bike it run great and you only have to do one change at the start of the season. synthetic oil is usualy good for about 15000km unless you put more on than that.
Hope this helps.
75 views
Usually answered in minutes!
×