Hi Monty, That what you have shown is the engine number and not VIn number. The VIN number is usually on the frame of the motorbike at around the front side either left r right side.
Follow this link to get the idea--->> https://www.youtube.com/watch?v=zh-jlkYCMhw
Hope this helps, once you get those numbers it will be easier to determine the full details of your bike. Hope this answer helps!
SOURCE: how do i adjust the idle on my 1995 yamaha virago
On most bikes and four wheelers, this is done by a throttle stop. the position of the stop is usually adjusted by a screw. Remove the tank. turn throttle and see what moves by the carb/ injectors. When you return throttle to idle, the moving piece will come to rest on the throttle stop. You can now adjust its position by turning that screw.
SOURCE: HI SERIAL NUMBER ON MY V-STAR 1100 , CAN YOU TELL
If you look at the VIN number on the headset of the frame, the 9th digit is usually the last number of the year
SOURCE: front fork seals leak
what is the problem in the following situation.in the following situation starts even if shift is in neutral position.before changing the alternator was not so.yamkaha fj 1200 1 tx 1987
SOURCE: I have a 96 yamaha
I believe theres 2 small bolts under front of seat...if you pull the cushion back you should see them. Remove the 2 bolts and the front of the seat can lift up....then slide the seat forward as there is a plastic tab that holds the rear of the seat into a slot. The seat should lift off once the tab is clear.
SOURCE: tire pressure for font and
There should be a sticker on the driveshaft with the tire pressure info. If it is missing i would run 30 in the front and 35 in the rear. (psi)
476 views
Usually answered in minutes!
×