How do i get gas cap out with no key yamaha yx600

SOURCE: 2003 yamaha v-star 1100 gas cap assembly

You are probably not going to find assembly instructions. If you can't find all the parts or screws then get another cap. Google " motorcycle salvage yamaha " and you can probably find one at a much lower cost than the dealer would give. By the way, forget any loose screws in the gas tank. The stuff can not get past the fuel valve and filter and are not going to hurt anything.

Please rate this answer. Thanks!

SOURCE: Yamaha V-Star 1100 Gas Cap is Stuck

shoot wd40 into locking mech and press down hard on cap while turning key.....Tim

SOURCE: 1989 Zuma, just rebuilt carb to OEM specs, turned

answered

SOURCE: whats the best and easiest way to set the carbs on

Your problem is probably the sycronizing as long as you havent messed with the fuel screw or jetting. If you dont have a set of vacuum guages you can eyeball the slides in the carbs to at least get you by and you can usually get them pretty close. Find the carb that is directly linked to the cable. the other carbs are adjustable to that carb so you need to make all the other carbs identical to that one. Look at the gap from the bottom of the slide to the bottom of the bore of the carb on that base carb with the throttle at idle bike not running. With the adjustments on the linkage to the other carbs adjust the other slides to the same height as that base carb as close as you can. Measure if possible to get all the carbs as close as possible to each other. you may have to adjust the idle after. If the adjustments on the carbs are all cables, for example there is a cable to each carb directly connected to the slide just adjust each cable accordingly and achieve the same as above. make sure you have a little freeplay at the throttle when you are done. you can adjust that by the cable adjustment by the throttle which will keep all the carbs in sync

SOURCE: im looking for a wiring diagram for yamaha yx600

Hi and welcome to FixYa,

For the wiring diagram of a YX600, please click here.

Good luck and thank you for asking FixYa.

Testimonial: "excellent, very helpful and thank you, will certainly use your web site again, cheers"