SOURCE: how to change brake pads on a 2005 1200 Harley
there is 2 bolts on the caliper take them off and there are pad pins that need to be taken out.. inside the caliper there is a metal clip where the pad sits in.. put them in the same way they came out once you start its pretty self explainatory.. you should not have to blead them
SOURCE: rear brake pad change 07 streetglide
You don't have to but you should pull the caliper anyway, to clean it and check the anti-rattle spring.
SOURCE: changing rear brake pads..
if the 04 is the same as my 05 ultra (and i belive it is) the rear caliper can not be removed with out pulling the axel out, and taking the 3 big star bolts out will split the caliper in half, (it is a 2 peice)
take the 2 small star bolts out, use a stiff putty knife to push the pistons back, before you pull the old pads out, make sure you take the cover off the master, slip new pads in, start with the frount and put the bolts thru to hold it then the rear
when you retighten the bolts you want the hear a "pop" that means the rear tip of the bolt is past the retaining spring, if you dont hear a pop the bolts will work there way out, (found this out the hard way, $129 new rotor, $195 new caliper)
162 views
Usually answered in minutes!
×