My motorcycle is getting a #22 and 19 reading on the dash and won't start with a engine light on, can someone please help me. Thanks
SOURCE: 2005 model yamaha r1 motorcycle
It sounds like you have a poor ground connection. You'll have to disassemble and check the wiring harness for broken wires, start up near the ignition switch or around anything that is no longer stock on the bike (like aftermarket turn signals, fuel nanny, power commander, etc.)
SOURCE: Possible blown fuse on 2002 Yamaha YZF R1
look at item #12 for fuse location.
http://partsfinder.onlinemicrofiche.com/atlanticcycleandpower/Yamaha_OEM/YamahaMC.asp?Type=18&A=372&B=48&Action=O
SOURCE: ineed a wiring diagram for 2008 yamaha yzf r1
http://www.yamaha-motor-europe.com/community/service/manuals.jsp
SOURCE: how much oil does a yamaha yzf r1 2007 take
"most" bikes on average without filter change take anywhere from 2.8 to 3.0 qts. I always purchase 4 quarts because an extra one will always come in handy in the future anyway. First your bike i believe has a sight gauge... First stand the bike upright on a stand or have someone hold it up for you pour in 2 and 1/2 quarts, put fill cap on, start bike, let warm up for about a minute to let the oil settle, then turn off and then start pouring in slowly till it gets to a little above 3/4 full on the sight gauge...you never want to overfill it could cause engine damage. Now just remember how much oil you put in and that is the approx. amount.
159 views
Usually answered in minutes!
×