I am replacing the top of my Honda CRF450R and need the torque settings for the four main top bolts.
SOURCE: Torque setting
Ok, lets see- I still have my old official shop manual for that bike...Cylinder head nut torque is 16-20 ft lbs,Cam sprocket bolt torque is 12-17 ft lbs, Valve adjuster cover torque is 7-10 ft lbs, Cyl head cover torque is (6mm)- 7-10 ft lbs (7mm) 9-12ft lbs, Rocker arm adjuster nut torque is 11-13 ft lbs.
SOURCE: Torque settings on the clutch inner hub and clutch
The clutch inner hub torque values ar 7.5Nm or 7.5n-kg or 54 ft-lb.
The clutch springs torque to 8Nm or 0.8m-kg or 5.8 ft-lb.
I don't get paid for my answers and I am only trying to help. But I do take pride in them. So if you will, > > > > A “very helpful” rating for this answer? Thanks!
SOURCE: head bolt torque specs for 200 honda accord 3.0
its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs
SOURCE: honda CBR125 torque head bolt settings
any honda dealer can obtain that information and give it to you over the phone
Testimonial: "Thanks I phoned and its 29n.m for 4 main studs thanx!"
1,052 views
Usually answered in minutes!
×