07 ttr 50 clutch not engaging - 2007 Yamaha TTR 50 E

check your clutch rod adjustment on the clutch cover.

Hi, My guess you have a bad relay. The relay makes the clutch engage. Replace it.

NOT FOR SURE BUT SOUNDS LIKE MAYBE THE CLUTCH SWITCH COULD BE THE CULPRIT. ALSO CHECK THE SIDE STAND SAFETY SWITCH.

Make sure you full travel on the clutch lever. If it has been bent closer to the bars, it may not be releasing the clutch fully. If this is so, heat the lever up fairly hot to prevent the lever breaking if you try to straighten it. There should be about 3/4 inch of free play at the lever end. Hope this helps.

I would guess it is the starer clutch, also called the one way clutch. I went on to www.bikebandit.com and looked up your bike and it has a nice exploded veiw of your starter clutch . I will try to put a direct link to it , hopefully it will take you to it. http://www.bikebandit.com/houseofmotorcycles/yamaha-motorcycle-tt250rl-1999/o/m7707
if not go put in your bike and look under starter clutch.