SOURCE: bike coughs,splutters and even backfires more so in low rev's
Either take the carbs off and clean them or add some fuel additive to clean the system. Sounds like you have a clogged jet.
Testimonial: "will try this later"
SOURCE: hi, I have a gpz500 A series on a 94 plate. I
hy I have gpz500s 94" and the rotor just brake to part,and I put a zzr 600 rotor in and now I have a problem because the zzr rotor didn t have a sensor on the rotor ve weld the old sensor of the gpz rotor exactly there were was the gpz rotor,but now at 5000rpm just stops for a second and its runing...I dont know whats the problem..
SOURCE: Hi I have a problem with my Hyosung GT250R. What
Hi, if the the bike is idling at a normal rpm but keeps on stalling you probably will need to service your carbs or at least clean the pilot jet as this is probably blocked/dirty.Bike carbs are simple and once the float bowl is removed you can get the pilot jet(smallest jet) out with a small bladed screw driver and clear it.
103 views
Usually answered in minutes!
×