I got a 2002 warrior and finally got it running, it idles just fine but when you hit the gas it boggs down and backfires. i changed the sparkplug and cleaned the carb, thats the only thing i ccan think of that could cause this problem. what do you guys think??
Try checking the switch for your parking brake. It is the top wire in the clutch handle boot. This wire connects to your CDI box, and restricts the RPM's while the parking brake is engauged. To find out for sure, trace the wire down to the plug under the headlight assembly and disconnect it. Now try starting you machine and give it some throttle!
My 350 warrior wont start it cranks but it wont start, had it in the shop 2 times already but we only get to ride it 4 like 3 days and then it shuts down and wont start,what can i do or can it be cuz its getting choked on gas
I have a 2001 warrior 350 it runs great at idle bUT won't rev I rebuilt carb put on new carb boot and unique hooked park brake switch posing me off some one plzz help
My rubber air intake boot is split open and it backfires and sputters while running
I think you have too much gas to air ratio. if u have cleaned carb, u must adjust the jets a little tweaking and some time and you should be fine
6,497 views
Usually answered in minutes!
alright thanks mann ill give that a try but can i ask you a question, how fast is that raptor because im thinkin of getting 1 of those next
i have a 88 warrior and it does the same thing. It idles fine, and i can give it full throttle for one goose, but if i hold the throttle for more than one little goose it just, its like it's being choked from eather air or fuel. I was reading online and someone with the similar situation said it could be the CDI,
my worrie does the same thing but i even have to run it on choke to keep it ideling so i have tried everything that i could think of and can't solve it someone plaese point me in the right direction
same problem when i give it gas it backfires and boggs down shuts off but idles fine.
i got a 2001 warrior and mine did this and it turned out the exahust header pipe had came loose . done it up and as good as new
×