How to add fork oil to 2005 boss hoss forks - Boss Hoss Motorcycles

SOURCE: Fork oil level: 2006 KDX 200

This all depends on what size forks you have, but a good rule of thumb is 120ml. After that then what you want to do is to ride the bike and make adjustments to your front end until your liking.

SOURCE: fork oil capacity

330mls per leg

Gino Cussen

• 217 Answers
• Posted on Jul 05, 2009

SOURCE: Fork oil capacity for a 2005 kawasaki vn1600 mean

Hi Des, Im am Irish too, howya doin? The oil you want is SAE 10W-20. and 445ml if you are changing the oil. It can be more accurately checked with the fork removed and fully compressed and the spring removed, the oil will be 120mm from the top ot the stanchion.
The manual will give you more info on this and any other future problems so here is a link to it. Good luck to ya, and please rate me if I've helped you. Thanks
[email protected]

VN1600 manual...
http://www.scribd.com/doc/9607829/Kawasaki-VN1600-A1A2-Vulcan-03-Service-Manual-ENG-by-MosuenoPW

SOURCE: front fork leaking oil from bottom of the seal.

Before you take it to the shop try this.Get some camera film,Cut the notched edge of it and trim the top to an angle of 45 deg..Slide this up into the fork seal and working it up and down,slide it all the way around the seal.When you get the feel of it,you can feel tiny bits of grit.This will clean the grit out 99% of the time.I always keep a piece of film in the toolbox.

SOURCE: fork oil capacity

medium fork oil - 150 mls in each leg