SOURCE: suzuki burgman 650 won,t change gear
I had the same problem until I found out that when you put the Burgman on it's center stand, it pushes a small round metal pin (spring loaded or something similar) that limits the Burgman to 1st gear only. Some kind of safety feature, I guess. You can see the little switch if you put the bike on it's side-stand, get down on the right hand of the bike and look where the centre stand meets with the body of the bike. My switch was stuck in permanent "on" so I just pulled the pin to it's full extention with a pair of pliars, then cut it with a junior hacksaw.
SOURCE: suzuki burgman an400 speedo not working
There is a hmm Do not remember the english term, say thing down at the front wheel, sensor, That was the malfunction on mine. Second time t was the cable to the same sensor
SOURCE: Need to find a service manual for a suzuki burgman scooter
Hello ! I can't find the fusebox on may SUZUKI burgman 250 year 1999. Do you have any advise ,or idea? Thank you very much...
SOURCE: my suzuki burgman 650 will not go into gear
Most likely, the switch for the centerstand is stuck in the depressed position, a relatively common situation. The centerstand switch, which is exposed to road debris underneath the bike, often accumulates grime and periodically needs to be cleaned. The centerstand switch's purpose is to prevent damage to the CVT when the bike is on the centerstand, and thereby has no rotational resistance. When the centerstand switch is "stuck", the ECU thinks the bike is still on the centerstand and prevents the CVT from shifting up to a higher gear.
1,768 views
Usually answered in minutes!
×