Pull in clutch, move shift lever to 1st gear. klunk or hard shift occurs, other gears half hard shift. is this normal
SOURCE: BMW E36 Auto gear lever
its a bit fidly , ther is a screw under the plastick trim on the gear knob its self and then it should fall apart from ther .. you should be able to get a new one cheep from bmw . or fix yor self as all it will be is the spring has gone . sorry i cant be a bit more help but its hard to explain , but easy .
SOURCE: transmission won't shift to 2nd and 3rd gears goes from 1st to 4th.
Doesn't sound like a simple fix. I would suggest having it serviced.
SOURCE: My gearing is causing me headaches, mostly in and
Check the leaver is not loose, then try adjusting the gear leaver down a notch or two helped for me.
SOURCE: engine seems to be lumpy at times and a bit of a
Go to IBMWRA tech page , both these problems are addressed there. The gear switch in the tranny is bad and the throttle problem can be several things, TPS out of adj or TB's need syncing usually the case. Change the plugs to the Autolite numbers shown on the tech page.
SOURCE: 1994 325 BMW shifting from 1st - 2nd gear is hard
unfortunately yes it does.its sounds like your 2nd gear synchro is out.unfortunately your tranny needs to come out to fix it.does it only between 1-2? or other gears? if all gears your cutch is goin but just between 2 specific gears a synchro times the gear teeth so they lock in and its off and teeth on the gears are the grinding you are hearing.sorry to have to tell yah that one.i always loved my old 325 is model always fun to drive.
Testimonial: "quick and informed thanks"
182 views
Usually answered in minutes!
×