200 rd wiring diagram - Yamaha Motorcycles

hi,

if thats a dodge this might be it..

Re: Infinity Gold AMP Wire Diagram



Well I don't particularly care for Haynes manuals, but my FSM's did not have anything either. I found this in thejeep cherokee haynes manual and it says that it is for 97 and later models but see if it is close. it looks like there are 2 harnesses so I will list them seperately:

Hartness 1:
[7] Left Soundbar Speaker (+) BR/YL
[8] Left Soundbar Speaker (-) BR/LB
[5] Left Front Door Spkr (+) DG
[1] Left Front Door Spkr (-) BR/RD
[9] Right Soundbar Speaker (+) DB/WT
[3] Right Soundbar Speaker (-) DB/OR
[6] Right Front Door Spkr (+) VT
[2] Right Front Door Spkr (-) DB/RD
[4] Power Amp Relay Feed DG/RD

Harness 2:
[05] Right Soundbar Spkr (+) TN/RD
[13] Right Soundbar Spkr (-) TN/BK
[06] Left Soundbar Spkr (+) WT/TN
[14] Left Soundbar Spkr (-) WT/BK
[11] Passenger Door Spkr (+) LB/RD
[10] Passenger Door Spkr (-) LB/BK
[04] Drivers Door Spkr (+) DG
[12] Drivers Door Spkr (-) LG/RD
[01] Power Amp Feed
[02] Power Amp Feed
[07] Power Amp Ground
[08] Power Amp Ground

The tweeters run in parallel off of the door speakers.... If I can help any more let me know.

-Mike.
https://forums.off-road.com/jeep-mid-sized/105694-infinity-gold-amp-wire-diagram.html

The best thing to do would be to get the diagram for a RD/RZ 350LC and the diagram for your KX and use this for comparison. There is no such thing as a "Banshee" diagram. It is a custom built motor, made using a Yamaha RD LC engine.

Femsawhat? Anyways I have had three of these bikes and I'm guessing that you are asking for an aftermarket component wiring diagram. I'd run with Zeeltronics simply because the service support is there. Anyways, try yamaha-rd.com, the guys on the forum are absolute gurus and most of em eat, sleep and breath this stuff. Don't trust Billy;)

speakers: L/F - OG/LG [+] LB/WH [-]
L/R - GY/LB [+] TN/YE [-[
R/R- OR/RD[+] BN/PK [-]
R/F- WH/LG [+] DG/OR [-]
WH/YE HOT f2 20 amp fuse box
BK/PK HOT VPWR
RD/BK illumination
RD/LB Hot in start f2 5 amp fuse box
BK ground
BK/LB ground
BK/OG ground
as far as I know there isn't a "remote" wire unless you are dealing with steering wheel switches
Hope this helps!!

You dont want to cut your wiring for the tale lights on your jeep,
stop at a auto parts store and pick up a made for your jeep plug in adapter,
RD