Kick start lever wont stay in

Murtaza Akberali Versi

• 767 Answers
• Posted on Feb 03, 2009

SOURCE: my 2005 CRF250x wont start with kick start or electric start

Hi,
You will have to perform a compression test.

Knight.

SOURCE: while riding my yz 125 it just died and won,t kick up again

• If a hole in the piston then install new piston and rings. Next, clean the carbon off the head and install a new head gasket.
• If cylinder wall is scared the piston has seized up. Pull the cylinder off and take it to the dealer. Have them bore the cylinder and return it along with a new oversize piston and rings.
• While at the parts counter, get a new stock spark plug and a supply of Yamalube Two Stroke Motor Oil. You need to add 4 ounces per gallon when filling up. This will be a 32/1 gas to oil ratio. NEVER ride the bike without at least the needed 32/1 mix.

SOURCE: my 01 yz 125 wont start with kick start,n loses power in low rpms

sounds if you picked up some water/dirt in fuel when was low

clean fuel bowl and flush carb by drain port if still ruff then remove carb for cleaning

SOURCE: rmz 250 04 model wont idal or kick start

Like I told somebody earlier to day lower the octane rating of the gas you are using....repost if you need anything futher......

SOURCE: bike boggs down no powerband rm 250

i have a 92 rm 250 an i just had it fully rebuilt an it laggs in power band an splutters an feels guttles