Hi, My pulsars 180 ug4, 2009 carburator screws slipped and not able to open it. Please provide some solution
Hi ok i am assuming you stripped the phillips heads and connot turn the screws to take them off.
2 ways to loosen them 1 mini set of locking pliers or get a small metal punch and a small ball peen hammer try and secure the carb so it wont be damaged and take the punch mak sure the tip is sharp enough on the outside edge of the head of the screw make indentation and hit it in the counter clockwise direction it will come loose then screw it the rest of the way out replace them with new screws when you put it back together.
SOURCE: Can any one provide electrical wiring diagram for
wiring diagram will be found in pulsar manual, that you got from Vehicle. then if you dont have that one, Xbhp is a website that will have pulsar manual. try check it out!
SOURCE: Gearbox not smooth in Pulsar 180
Because its one gear front and four as back so it doesnt smooth..
SOURCE: I need a new carburator for pulsar 150 dtsi 2005
Once you find a dealer just simply tell them you need a new carb. they will know which ones it is
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c
SOURCE: can i fix pulsar 200 cooling system for pulsar 180
measure the overall dimensions and the mounting brackets, if they are the same it can be used
104 views
Usually answered in minutes!
×