Its possible that you have an aftermarket clutch and springs in it. The best way to know for sure,is to pull the clutch cover off the bike,and pull the springs and measure the height and spring tension.Be sure to tap the clutch cover with a plastic mallet SOFTLY and rotate the cover while pushing down before removing it.this keeps the rubber o-ring from popping out,...which is a PAIN to get back in if it slips out.
Good Luck!
SOURCE: will main clutch casing fit yz 125 2001 from 1997?
Hey Ryan! Long time since hearing from you.
When you say "main clutch casing" do you mean the right side cover for the gearbox or do you mean the primary driven gear (AKA "clutch basket") that the clutch boss (AKA "clutch hub") and all the clutch plates fit into?
If you mean the right outer casing > they are slightly different, '97 pn 4JY-15431-10-00 and 2001 pn 4JY-15431-12-00. The entire clutch is the same from 1997 through 2001.
SOURCE: yz 125 1990 clutch spring diagram
www.bikebandit.com
It's one of the few that has a diagram.
Not sure what you mean by anti-rattle? The springs are for the pressure plate, and allow the clutch to grab, so you can go.
173 views
Usually answered in minutes!
×