I need a wire diagram for 2000 harley daverson 883 hugger, my rear signal lights dont work

SOURCE: 2000 XL 1200 S Sportster Sport: 2003 Harley 883 Sportster Hugger sat for a year. D...

Remove the carb soak in carb cleaner, **** out small bleed holes with a wire from a wire brush etc. One of the passageways is still clogged, or the float is sticking.

SOURCE: wiring diagram for harley davidson

Contact me directly and I'll send you a copy of the wiring diagram you need. This forum will only allow for a file size of 150kb. Contact me at [email protected] and remind me of what you need.

Good Luck
Steve

SOURCE: Wiring diagram for 1988

I can help you with your schematic request. However, this forum will only allow me to send files up to 150kb, too small for a schematic without losing the clarity off it. If you will contact me directly at [email protected] , I will e-mail the schematic to you as a scanned jpeg file at no charge. Please remind me of what you need in your e-mail. I handle many request in this manner and I cannot remember who wants what.

Ride Safe
Steve

SOURCE: Wiring problems on 2000 Harley 883 Sportster

If you have two wires that go to the turn signal and they don't work one way. You could try them switched around.
This is for a turn signal that is NOT also a running light. (Yellow Lens to Rear)
Use a test light and turn on the turn signal test both wires with the test light clipped to the ground or chassis of the bike. The wire that causes the light to blink will be the positive or hot side. That wire should attach to the bottom of the bulb.
The other wire is the Ground or common and that should attach to the side of the bulb holder.

Testimonial: "Thank you, as this seems logical. I will give it a try."