1992 Yamaha XJ 600 Diversion S Logo

Related Topics:

Posted on May 23, 2012

Starter relay location on 600 diversion

The engine won't turn over there is a clicking sound coming from what looks like a hi-tension relay under the seat when the start button is pressed

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jun 28, 2009

SOURCE: Bike won't start

so where did you find the bad ground, and if I wire the negitive side directly to the frame can that be a permanant fix? Myne is doing the exact same thing

Ad

Anonymous

  • 149 Answers
  • Posted on Aug 13, 2009

SOURCE: Yamaha XJ600 diversion starter motor problem

sound like your starter gear might be missing a tooth or some other king of damage, this shouldnt be a costly repair, but I wouldnt ride too much as it is, if there is a chunk of the starter gear in the transmission, this could cause much damage and be very costly

Testimonial: "thanks for advice, unfortunately stater gears are within crankcase, which means total engine strip. Probably cheaper to get another engine!"

czaa

Arnie Burke

  • 7339 Answers
  • Posted on Aug 30, 2009

SOURCE: Starter does not turn

chec fuses-bad ones can appear normal-inspec if connecs r tite at starter n solenoid area-n also relays--starter may be bad ur bike is 10yrs-test it--that electric clutch may be malfunctionin too

Anonymous

  • 6 Answers
  • Posted on Aug 31, 2009

SOURCE: 89 Fzr 600 wont start

get ur ignitor unit tested. just a suggestion. good luck

Anonymous

  • 278 Answers
  • Posted on Dec 08, 2009

SOURCE: location of flasher relay yamaha diversion 600

Howdy: Most flashers on metric bikes are near the rectifier. Try the left side held in by a rubber typs band. Good luck - Doug

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 chevy s-10 wont even turn over? ran fine this afternoon. parked it, came out tonight, and it doesn't even crank over. Nothing!

You need to find someone who knows how to test the electrical circuits , check the battery , battery connections ! Do the headlamps light ? or they bright ? Does the dash light up when you turn the key on ? Without testing we would only be guessing , could be a lot of different thing's .The clicking sound is probably the starter relay . The starter could be bad , wiring problems , main battery feed cable to the starter . Testing is the only way of finding what's wrong, not guessing .
Starter Voltage Drop

Looking at a wiring diagram to see what all is involved for the starter to work . Free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. Year , make , model an engine size . Under system click on engine ,then under subsystem click on starting . Click search button . then blue link . Does the vehicle have manual or automatic transmission ?
Do you know what a relay is and how it works ?
In this video he shows horn relay but the starter relay works the same way . Starter relay located in the under hood fuse box .
VEHICLE RELAYS Operation Diagnosis

Learning how it works then learning how to test electrical circuits is how we fix automotive electrical problems , not guessing an replacings parts .

1helpful
2answers

2005 Altima won't start, hear clicking sound coming from fuse box,key stuck in ingintion,won;t turn over,tried to jump start.

the clicking that you hear is coming from the starter relay. sounds like your ignition starter switch or ignition lock cylinder is bad.
1helpful
1answer

2001 aurora won't start at all. Hook batery up horn horn sounds and doesn't stop head lights stay on but nothing happens when the key is inthe ingition. No clicking or anything at all. alarm on...

The security system does not disable the starter, it only disables fuel to the engine. In the fuse block under the hood, locate the STARTER relay. Place your hand on this relay and see if it clicks while someone else turns the key to start...if the relay is ok then the starter itself is faulty. Good luck, i hope this helps.
4helpful
1answer

Yamaha XJ600 diversion starter motor problem

sound like your starter gear might be missing a tooth or some other king of damage, this shouldnt be a costly repair, but I wouldnt ride too much as it is, if there is a chunk of the starter gear in the transmission, this could cause much damage and be very costly
0helpful
1answer

Yamaha 600 seca. start won't turn over getting over 12 to the starter from the relay, is is a bad starter or ??

If you are getting 12 volts at the starter, and a good GROUND, while holding the starter button, your starter is bad.
1helpful
2answers

Starter problem

I think there are two possible causes here:-

1.(Easy) your starter-button is permanently contacting, split the right-hand switchgear on the bars to check and clean.

2. (Git) The starter circuit relay(Not the starter-relay) in the junction box is knackered causing the circuit to be live as soon as ignition is switched on.
This will be located under the seat or behind a side panel. The whole assembly will have to be replaced probably.

Hope it's the button.
1helpful
2answers

Engine will not start

That Clicking Sound is Coming from the Starter. First check the Starter Relay. It should be in a Fuse Relay Box under the Hood. If this is good, The Problem will be the Starter and will need to be Replaced. Also Check the Tension on the Belt. If the Belt is even a little loose it will not allow the Alternator to Charge the Battery and will cause a Not Start. Let me know what you find out. Please Rate my Response, I need all the Help I can get! Thanks!
Not finding what you are looking for?

359 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...