2005 Suzuki GSX-R 750 Logo

Related Topics:

A
Anonymous Posted on May 13, 2012

F1 code on my 05 suzuki gsxr 750

In my temp gauge there is a flashing f1 code that keeps blinking? What can i do to see whats wrong?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jan 24, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jan 24, 2013
Answers
1
Questions
0
Helped
5475
Points
1

I HAVE A 2005 GSXR 750 AND WHEN IM AT HIGH RPM THE BIKE SHUTS OFF. DOES THIS HAVE ANYTHING TO DO WITH THE FI CODE BLINKING? BUT THERE ARE DAYS WHEN IT RIDES FINE....WIERD

5 Related Answers

choprboz5

  • 197 Answers
  • Posted on Feb 03, 2010

SOURCE: f1 code on my 2006 suzuki gsxr

When the red light comes on, eg (F1) use these fault codes to find your problem. To extract the codes from the computer system, there is a two pinned connector hanging out of the wiring harness, on the left hand rear of the bike, (say above the pillion foot peg under rear trim. Be sure not to confuse the other connector used by the Suzuki Workshop Mechanics, as this has four or five wires to the connector) After locating the one with only two wires at the back, use a split pin or paper clip to bridge the two wires togeather and turn the ignition to the ON position. You should now be able to read the code on the console. The fault codes are as follows,,
**** GSXR Fuel Injection (FI) Code List:*****
C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR C29 - SECONDARY THROTTLE POSITION SENSOR C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL

Ad

Anonymous

  • 39 Answers
  • Posted on May 15, 2009

SOURCE: my suzuki gsxr cuts out after 6000revs whilst on the road

sounds like carbs

Anonymous

  • 2653 Answers
  • Posted on Feb 28, 2009

SOURCE: owners manual required for a 1989 suzuki gsxr 750 RK model

I've got a service manual for a GSXR 750F

Would that help?

Let me know.

tombones

  • 3567 Answers
  • Posted on Aug 13, 2009

SOURCE: suzuki gsxr k6 600 fuel injectors problems

The display is really FI as in Fuel Injection. The fuel injection computer has sensed a fault in the Injection system. You will need to ride the bike to a dealer and have them read the fault codes. It is probably just something minor. Major faults will not allow the bike to run. You will not hurt the bike if you ride it.

Can I get a “very helpful” rating on this answer?

Anonymous

  • 1 Answer
  • Posted on Dec 06, 2009

SOURCE: 05 GSXR 750 Speedometer Reads 0

I just had the same problem 2004 gsxr 750. After massive troubleshooting and time I found out it was the gauge. So I then ebayed a gauge on ebay and bought on for 290 dollars. Speedo now works. I am just off on the actual speed, need to by a speedo healer.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2008 gsxr 600 F1 code keeps flashing wont start

Take it to a dealer. Fi means some breakdown, dealer can retrieve code.
0helpful
1answer

Got a suzuki gsxr srad 2000 model went out for a ride today since i brought the bike 2 weeks ago and i let her warm up with the choke up must of forgot to put it back down for the ride and now it wont...

Around 2000 was the first year for fuel injection for the GSXR 750. It really isn't a 'choke' in the true sense of the word. It's a device that causes a high idle similar to an 'enrichener circuit' to warm up the bike engine. There should be no damage to the engine by leaving it on for a short ride so I'm thinking there was an unlerlying issue with the bike that the previous owner left undisclosed.

Around 2003 that device was abandoned due to the advancement of technology in fuel injection and was no longer needed.

After typing this response I just noticed the original post date was in 2012 and I'm sure the bike has been either repaired, sold or crashed by now but maybe this answer will be helpful to someone else.....
0helpful
1answer

I have a 2000 gsxr 750 suzuki and was wondering what tempature should it idle at

normal temp is between 85- 95 depending on outside temp and speed travelling,fans will normally switch on around 103-105 degrees celcius
3helpful
2answers

05 GSXR 750 Speedometer Reads 0

I just had the same problem 2004 gsxr 750. After massive troubleshooting and time I found out it was the gauge. So I then ebayed a gauge on ebay and bought on for 290 dollars. Speedo now works. I am just off on the actual speed, need to by a speedo healer.
3helpful
2answers

MY 07 GSX R 6 OCCASIONALL POPS A RED LIGHT CODE THAT READS F1 IF

f1 on gsxr stands for fuel injection, unless bike keeps stalling ignor it.my 04 did it all the time , ithink mainly when in slow moving traffic in the wrong gear.
0helpful
1answer

Bike cutting off and FI light and check engine came on and off

that is the code for when a bike is laid down .... auto shut off sensor ...... as soon as u turn key off and back on it should be good to go again. ....
Not finding what you are looking for?

5,485 views

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...