SOURCE: How do I hotwire my 78 shovel head?
Run a wire from the postive side of the battery to the top side of the coil. There should be two white wires on the top side of the coil and a black wire on the bottom. Once there, you can kick start the bike. If you want to use the electric starter, pop the rubber boot off starter solenoid and jump from the large top lug to the small lug in the middle to engage the starter.
Or, you can purchase an aftermarket switch and change out the switch. You need a 6-lug switch for you 78.
SOURCE: looking for oil line diagram
I have a diagram of the oil line routing for a Shovelhead. I cannot send it to you via this forum because it has no means of sending an "attachment". If you'll contact me directly at [email protected] I will send you a copy of the drawing in a jpeg file attachment. Remind me of what you need as I get lots of request for various information.
Good Luck
steve
Testimonial: "very quick response"
SOURCE: Re-wired the 1981 FXWG Harley
contact me directly at [email protected] I think I have a wiring diagram that I'll send you. Don't forget to remind me of what you need and the year and model bike. I get a lot of requests and I can't remember who needs what.
Steve
1,372 views
Usually answered in minutes!
×