- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1
Open the choke by pulling the choke lever on the left
handlebar control toward you. Set the bike on its kickstand, put it in
"Neutral" and start it up. Allow the Road Star to warm up for about 10
minutes before continuing with the adjustment procedure.
2
Locate the idle adjustment screw on left side of the bike
just below the rider's seat. Twist the adjuster screw clockwise one full
turn. This will ensure the bike stays alive so you can adjust it to the
proper setting.
3
Close the choke lever and listen to the engine carefully.
Twist the idle adjustment screw slowly counterclockwise. You should hear
the engine speed start to slow.
4
Twist the idle screw counterclockwise until you hear the
engine start to sputter and die. When this happens, stop and turn the
screw one half turn clockwise. Your bike should now be idling at the
correct speed.
×