SOURCE: 1998 cr250 bottomend case bolt torq specs
Hello the bolts should be torqued to about 10 N-m , or 7 ft-lbs in an alternating cross pattern
SOURCE: main jet and needle setting for 2003 honda cr250 at 5000 ft elev.
this should get you close, will still have to fine tune due to exacting conditions.....humidity, temperature, pipe, silencer and reeds....however try this:
Main 360
Pilot 20
Needle H1-70
Needle Top Clip
Air Screw 2 Out
319 views
Usually answered in minutes!
×