I have a Celcus TV, the only make not on the code list for the One4All remote I just bought! Does anyone know the code?
Try these codes. If it do not help you, Try code search method.
0147 0135 0250
0257 0310 0394
Code Search Method
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
HI, the codes are usually the same as for Vestel (the Turkish company that make Celcus). So check out the Vestel codes for your remote handset. worked in seconds for my no name chinese unversal remote.
SOURCE: one4all remote codes
You can find the remote control codes for different brands
of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your
brand is not listed, and you are still not able to get the unit to respond, try
the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you
reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You
may have to press this sequences of buttons up to 100 times to search the
entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the
following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys
or press and hold SETUP until the Cinema's red light flashes twice to lock in
your new feature. (If the red light does not blink twice, stop and repeat steps
through 6).
To test the new feature, press and release the device key in which the new
feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device
Hope that helps!
If your issue is
not resolved, please do not assign a rating just yet. Please post back as
to what steps you took, results, etc, and I will try to assist you further as
best I can. I am here at your service.
P.S. -You can rate this solution with one of
four votes, if you feel your issue is resolved (remember that at times a bit of
to and fro dialogue may be necessary to resolve an issue).
Thank you for using FIXYA!
IrishDruid
SOURCE: code for polaroid tv
I just got a new directv receiver...dvr....the codes for polaroid were not listed on the unit but were included in the booklet that came with it. They are as follows....10765,10865,11262,11276,11314,11316,
11326,11327,11328,11341,11498,11523,11991,11992
These were all listed for Polaroid. Hope this helps.
SOURCE: tv remote code for a Symphonic TV using the Innovage jumbo remote
try this site for most universal remotes
http://www.remotecodelist.com/remotes/
SOURCE: omnitech giant remote code list
Here are codes for the Bell ExpressVu: 168 187 194
The very first one worked for me and I have the Omnitech universal giant remote.
8,197 views
Usually answered in minutes!
×