Turned key to on position and nothing happened. no lights, no power whatso ever. i pulled the ignition fuse out and it wasnt burnt, put it back in and the bike started up. the next day the same issue happened with no power, but pulling, and replacing the fuse didnt help. i messed with the fuse box itself and the bike turned on. i am thoroughly confused as to what the problem might be.
SOURCE: I have a 2001 suzuki gsxr 600 shifting problems
One of two things is happening. One is the cost of a double oil change and filter. The other requires your banks loan officer.
Change gearbox oil and install a new oil filter. Dirt and grit in the oil is binding the gears and shift drum. Ride the bike for a couple of hours. Now drain the oil again and put in fresh oil. This will flush out the dirt and grit. Use 10w40 motor oil. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell. If dirty oil is not the problem at least we eliminated the possibility for only the cost of a few quarts of oil.
Now let's talk about that loan officer. The shop is going to charge around $1000 plus to replace a bent shift fork. This is not a repair for the untrained. Sorry.
SOURCE: how to change sparkplugs on a suzuki GSXR 600 K1
You will have to remove the seat to access the bolts holding the tank in place. the four plugs are under the tank. you may also have to remove some of the bodywork. make sure to note the HT(high tension) leads that are attached to the plugs they are numbered, dont mix them up. Here's a link to both the service manual and workshop manual. Everything you will ever need to know about your bike is here, If it proves useful then please rate me. Thanks and good luck.
http://www.carlsalter.com/download.asp?fileid=083117122117107105095071083088045082095054048048095050048048052095083101114118105099101095077097110117097108046112100102
http://www.carlsalter.com/download.asp?fileid=083117122117107105095071083088045082054048048095050048048048045050048048051095082101112097105114095077097110117097108046112100102
SOURCE: What is a fault code ct 28 on gsxr 600
c28 is the code for a problem with the secondary throttle valve actuator
hope this helps
regards bert31000
SOURCE: suzuki gsxr 600 06 starting problems
200° is quite warm...
If the engine wont turn over, probabily you have a bad battery, a bad starter or a bad starter relay, or bad connections.
A hot engine has more compression. If the full battery power doesn't reach the starter it won't turn over...
SOURCE: replace clutch for 2006 suzuki gsxr 600 motorcycle
Do you have the repair manual ?? you can get it here for free, rate me if this helped you. Thanks.
http://rapidshare.com/files/12145854/GSX-R600-750K6.pdf
or here
http://www.carlsalter.com/download.asp?fileid=083117122117107105095071083088045082054048048095050048048048045050048048051095082101112097105114095077097110117097108046112100102
792 views
Usually answered in minutes!
×