Re: Replaced battery and now wont start is there reset...
Don't mean to sound patronizing but have you charged the new battery fully as per the instructions? Do the dash lights come on? there is no reset button on a motorcycle. What bike do you have?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Plug your ears first, open the car with key, open the bonnet to get to the battery, disconnect one battery terminal and cover this with rag to avoid a short circuit. That should reset everything - alarm, radio. Do not lock the car. After an hour reconnect the battery. Hopefully alarm will have reset and then use the key in the ignition. Hopefully starts but you should buy a replacement button for your car and security system. If alarm sound again, disconnect battery again and call an auto electrician.
I had the same problem - replaced the battery of my Nike Triax Fury and the time was blinking and none of the buttons were working. Turns out that you need both springs placed in the proper spot - the silver and gold springs. Both springs can be placed in their proper spot with the batter in. The gold one goes in the tiny hole near the "view" spot, and the silver spring goes year the 'cage' that holds the battery in place accross from the gold spring. Good luck.
Remove the battery and AC Adapter cord, and press and hold the power
button for 30 seconds. Then, without replacing the battery try plugging
in your AC Adapter to see if you get any love. If that doesn't work,
remove the AC adapter, reset the board again, and this time hold the
power button down as you plug in the AC Adapter cord. If you still don't
get any lights, you could try removing your memory, reset the board,
replace the memory, plug in the AC Adapter, and try one more time.
No, you cannot bypass it. Look under the dash for little box. It will have a reset button on it. Push the reset button, and try to start again. This usually happens when a batter is dead, the battery has been disconnected (also by replacing batter), and the system needs to be reset.
Please let me know if you need any further assistance.
to fix the problem i have got the solution from one of my freinds you will have to do the following
removing the battery, SIM card and memory card then return only the battery.
Press and hold both of the buttons:Menu button + slider.
Then while holding press the RESET HOLE once using the Stylus (pen).
×