Qlink Motorcycles - Recent Questions, Troubleshooting & Support


Hi, Sissye the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://eiwvnlp.bloggersdelight.dk/2017/11/21/cf-moto-qlink-legacy-250-service-manual
QLINK MOTOR ACCESSORIES PARTS LEGACY 250
https://www.manualslib.com/manual/1192373/Qlink-Lg250.html#product-legacy%20250
https://www.motorcycle.com/specs/qlink/cruiser/2008/legacy/250.html
https://bikez.com/motorcycles/qlink_legacy_250_2008.php

2008 Qlink... | Answered on Jul 16, 2019


Hi, Lisa before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
What To Do If Your Motorcycle Doesn Start
3 Things to Look for When Your Motorcycle Won Start The Allstate Blog
QLINK MOTOR Service Manual Legacy 250 $70
QLINK MOTOR ACCESSORIES PARTS LEGACY 250
https://www.manualslib.com/manual/1192373/Qlink-Lg250.html#product-legacy%20250

2008 Qlink... | Answered on May 19, 2019


Hi, Patrick for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Qlink, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Remove+the+carburetor+2008+Qlink+Siena+150&tbm=isch&source=univ&sa=X&ved=2ahUKEwjBgoOkzMvhAhUNnlkKHYjXDOoQsAR6BAgJEAE&biw=1440&bih=757
How to clean scooter carburetor
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
QLINK MOTOR ACCESSORIES PARTS SIENA 150
https://www.scooterdynasty.com/stockoempartsforscooters-9.aspx

2008 Qlink Siena... | Answered on Apr 12, 2019


Check Output Of Voltage Regulator for >12.5VDC - Check Input to Voltage Regulator for 13 to 35VAC- Check With DVM. With Engine Running. Additional help - call me "https://www.6ya.com/philip_b05beb373d913f26"

2008 Qlink... | Answered on Feb 08, 2019


The ZTE 3001S phone is named the "QUEST PLUS."

Qlink... | Answered on Nov 22, 2018


Hi, Walter for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Qlink, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Qlink Pegasus Coolant Flush Drain Plug How To Change The Antifreese Coolant On chinese Scooter http://www.family-motorsports.net/GY6-50cc-150cc.pdf free service manual QLINK MOTOR ACCESSORIES PARTS PEGASUS 150 http://absolutelyscooters.net/pdf/CGEN_dawg_scooter_manual.pdf free owners manual

2008 Qlink... | Answered on Nov 06, 2018


what do you mean by legacy ? what model bike please a bit more detail always helps

2006 Qlink... | Answered on Nov 02, 2018


Google (Qlink)(150)(manual) without parens.

2008 Qlink... | Answered on Jul 13, 2018


Hi, Bill for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Qlink, despair not, for a mere $70 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Pegasus Overheat New Theory
How To Change The Antifreese Coolant On chinese Scooter
QLINK MOTOR Service Manual Pegasus 150 $70
QLINK MOTOR ACCESSORIES PARTS PEGASUS 150
QLINK MOTOR Owner Manual Pegasus 150 $35

2008 Qlink... | Answered on Jul 09, 2018


Hi, Carl for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Qlink, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2006 Qlink Pegasus 150 radiator location Google Search
How To Change The Antifreese Coolant On chinese Scooter
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
Qlink Pegasus 150 Service Manual PDF Book Medialibs File Sharing
QLINK MOTOR ACCESSORIES PARTS PEGASUS 150
Qlink Achille 150 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2006 Qlink... | Answered on Apr 15, 2018


Hi, James for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Qlink, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
GY6 50cc magneto plate stator puller remover tool 50CC repair Repai
How to test and repair the charging system on scooter
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
QLINK MOTOR ACCESSORIES PARTS PEGASUS 150
http://absolutelyscooters.net/pdf/CGEN_dawg_scooter_manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2008 Qlink... | Answered on Apr 04, 2018


Hi, Micheal the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day
Qlink Adventure 250 2011 service manual DOWNLOAD FREE FULLMANUALS COM
QLINK MOTOR ACCESSORIES PARTS ADVENTURE 250 Qlink LG250 User Manual
2011 QLINK Adventure 250
2011 QLINK Adventure 250

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Qlink... | Answered on Mar 30, 2018


Hi, Donald for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Qlink, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tape deck door jammed
Sony TC W2 tape deck repair and demo
http://fullmanuals24.com/brand/qlink
QLINK MOTOR ACCESSORIES PARTS SAPERO 250
Qlink LG250 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2008 Qlink... | Answered on Mar 09, 2018


you will require a volt meter to find out what wires are doing what if you don't have a wiring diagram.

Qlink... | Answered on Feb 06, 2018


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Qlink, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2007 Qlink Legacy 250 battery location Google Search
2009 QLINK Legacy 250
Please Check First
QLINK MOTOR ACCESSORIES PARTS LEGACY 250
Qlink LG250 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Qlink... | Answered on Dec 17, 2017


Hi, Anonymous before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter motor or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. Faulty ignition relay.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Qlink XF200 Battery Failure ChinaRiders Forums
NEED Electrical Help for 08 DR200
QLINK XF200 XP200 MOTORCYCLE DIGITAL WORKSHOP REPAIR MANUAL 2008 2012... $15
QLINK MOTOR ACCESSORIES PARTS XF 200
Qlink XF200 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2008 Qlink XF... | Answered on Nov 23, 2017


If it is leaking oil out a tube , they may have overfilled it.
I'd be checking the oil level first.
If it is petrol leaking, the float in the carby might be set wrong, or needle and seat might be stuck, or worn out.
It depends what is leaking, but flooding carburetor (petrol) will usually come out a small tube, check the float height, adjustment.
Sometimes a small bit of dirt can jam the needle open, causing flooding.
Good luck

2008 Qlink... | Answered on Oct 02, 2017

Not finding what you are looking for?
Qlink Logo

288 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Qlink Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5962 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Qlink Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...