20 Most Recent
2004 Suzuki GSX 1300 R Hayabusa Questions & Answers
Engine starts ok, but cutsoff when hot
There is a temp sensor for the engine which can go bad and could be cutting off cuz it's sensing wrong temp on the engine? check it out maybe it's your problem..
HAYABUSA SLIPS BETWEEN FIRST AND
your clutch is slipping. replace it not so you all you need to replace is the fiber plates. If you keep riding even normally you be replacing both fiber and steel
Looking for nip to bleed clutch
The clutch Slave cylinder is on the left side of the bike just ahead of the driver footpeg. You will have to move the left lower fairing out of the way to access it. It should have a rubber cap and a 8mm drive to bleed.
Thanks and I hope that this helps.
Steve
Loose chain
Can you clarify your question please, is you chain old? does it need replacing or do you need instruction on how to adjust it?
ELECTRICAL HEADLIGHTS WORK BUT NONE OF THE OTHERS
it just sounds to me that you have a wire harness probably coming off from the display. maybe it looks connected but needs to be reseated. just have a look at all these harnesses. hope this helps. and check the fuses just to make sure you didn't short something out, because if the fuses are blown, then you'll have to find those loose wires before you put back in the fuses.
I have a 1999 gsxr 1300 hayabusa that a mouse got
CHECK WITH AGENT MATE SOME NEED THE SAME YEAR LOOM AS THE BIKE HAD THIS twIT WITH A SV 650 had to be a 2004 loom went through 4 due to ?ick heads saying loom for sv 650 03 04 05 06 all different mate there is a 99 loom on ebay uk
Not finding what you are looking for?