20 Most Recent 2002 kawasaki VN 800 Vulcan Classic Questions & Answers


Hi, Paulo I would start with a proper tune up, for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.amazon.com/Kawasaki-Tune-VN800-95-06-Vulcan/dp/B00NFRZXMA
Kawasaki Vulcan 800 Spark Plug Replacement Tank Removal
Kawasaki vn 800 classic Service Manual
OEM Parts for Kawasaki
Kawasaki VN800 Owner Manual

2002 kawasaki VN... | Answered on Oct 17, 2019


Hi, Judy for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How To Kawasaki Vulcan VN800 Carburetor Clean Rebuild
How To Kawasaki Vulcan VN800 Carburetor clean rebuild 1995 2006
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2002 kawasaki VN... | Answered on Mar 17, 2018


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Sprocket Torque Specs
Torque values Kawasaki Vulcan 750 Forum Kawasaki VN750 Forums
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2002 kawasaki VN... | Answered on Mar 17, 2018


Belt tension would normally be adjusted at the rear wheel the same as a chain, if it is within spec though I would suggest you check the alignment as the belt may be pushing against the lip of the sprocket.

2002 kawasaki VN... | Answered on Sep 28, 2017


Hi, Kenneth for this scenario you will need your service/owners/ manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2002 Vulcan Classic 800 vacuum line routing Google Search
http://kawasakiworld.com/vulcan/47740-99-vulcan-800-classic-vacuum-hose-system.html
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
Kawasaki VN800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2002 kawasaki VN... | Answered on Dec 20, 2016


where ever it idles the best ,dont set them to low like a harley , it needs to make enough electric for the fuel injection and computer ,ect....

2002 kawasaki VN... | Answered on Aug 29, 2014


I would check all the fuses first. If all the fuses check good then I would check the ignition to make sure it's getting power and is able to flow power through the switch out.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb

2002 kawasaki VN... | Answered on Nov 03, 2013


If you do not go thru your local dealer you need to get your manual and it will tell you the exact torque amount.

2002 kawasaki VN... | Answered on Nov 26, 2011


adjust the brake its very easy if this doesent work then its problably the switch but i havent had a problem with the switch just readjusted the linkage

2002 kawasaki VN... | Answered on Jul 07, 2011


Here is a link to download all sorts of owner resources Enjoy and Good Luck!!

http://www.kawasaki.com/kawasakinew/accessories2/PCCatItems.aspx?intCatalogID=1&intCatalogType=4&ProductTypeID=63&ModelMarketingID=221&ModelYear=2002&ModelCode=VN800B7

Thumbs Up if Helpful and Feedback is Appreciated!!

2002 kawasaki VN... | Answered on Jun 17, 2011


Check battery connections. If O.K., the battery needs a charge or be replaced. Napa or another part store can test it for you. Good luck!

2002 kawasaki VN... | Answered on Mar 08, 2011


Stator that produces power - doesn't turn, the rotor turns with the cranckshaft around the stator.

Starter that turns the motor over - has a solenoid .
First check that the battery is fully charged and the cables are tight then check the fuse in the top of the solenoid, if there isn't one then check the inline fuse that goes to the solenoid. replace if bad. start it.
Second if the fuse is good , jump the solenoid with a screwdriver or two and see if the starter turns over. if it does then your solenoid is bad. replace the solenoid. start it
if it doesn't turn over, remove the starter and have it bench tested, if it is bad, replace starter.

If the starter is good then.......

Put the bike in 5th gear and try to push it and see if the motor turns over.
If it does, try to start it again with the starter. i had an old Goldwing that was sitting and the starter couldn't turn the motor over until i broke the motor free.

if you cant break the motor free, its seized.

I beleive that its either the fuse or solenoid.

2002 kawasaki VN... | Answered on Nov 30, 2010


under the seat there is a reset button that taked a metal prong thingie (dont know whent it's called) you can use a paper clip - just jump the two terminals and try to start it,, doesnt happen all the time but it does happen.

2002 kawasaki VN... | Answered on Jul 23, 2010


low one upper is a vent black should be the lower one black is fuel gray is air

2002 kawasaki VN... | Answered on Jul 09, 2010


Your ignition switch is bad if you have to giggle it to get it to make good contact.

2002 kawasaki VN... | Answered on Jun 14, 2010


Check all conections at the battery - starter silanoid - and starter. Also check all the fuses.

2002 kawasaki VN... | Answered on Sep 28, 2009


There are clymers, haynes & factory ones on ebay. The clymers are my personal preference and have decent pictures and step by step directions.

2002 kawasaki VN... | Answered on Sep 28, 2009


There is a shock company that makes progressive shocks for your bike. That is also the name of the shock, and a lot of them are adjustable eye to eye length. But they are not cheap.

2002 kawasaki VN... | Answered on Sep 18, 2009


have you put enough in should be 3-4 full on sight glass also the correct oil and you have to put extra in when you put a new oil filter on get back to me if ok

2002 kawasaki VN... | Answered on Sep 17, 2009


Sound like your clutch is out or maybe you can adjust your tension because it is lose and it is not grabbing.

2002 kawasaki VN... | Answered on Sep 07, 2009

Not finding what you are looking for?
2002 kawasaki VN 800 Vulcan Classic Logo

Popular Tags

37 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

ROB

Level 3 Expert

858 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

VN 800 Vulcan Classic kawasaki

  • VN 800 Vulcan Classic kawasaki

Most Popular Question

need owner 39 s manual amp service

  • Motorcycles
Loading...