20 Most Recent
2004 Honda VTX 1800 - Page 8 Questions & Answers
My 97 honda 250 4 wheeler not firing replaced cdi coil spark plug
250 tells my cc, only, the ATV has real name what is it.
TRX250????
blown fuse
bad wires or connectors
kill switch bad
ignition switch bad
working with no manual or schematic is painful even me.
I use a voltmeter and trace the power to all that end to end.
has a crank or cam sensor?
i see no free manuals not banned for ***** or virus packed.
sorry free to find
why not just buy the manual and pay $10
and the first hour labor saved pays for the manual 10 times over
and call and investment grade book, keeps paying dividends.
8/16/2022 4:55:55 AM •
Honda...
•
Answered
on Aug 16, 2022
How to bleed the air from the cooling system for Honda ses 125 Dylan 2003
that takes skill.
the manual covers this, RTM yet?
the best way is open hose at the highest point coolant paths.
the fill until it is leaks there.
air floats up hill is the only magic here,Physics
but yes a huge pain on some cars with low hoods.
buy honda shop manual and read.
most cars have chapter on cooling that show the best way.
there are other tricks ask
7/6/2022 4:03:05 PM •
Honda...
•
Answered
on Jul 06, 2022
Should I fix clutch or carbs first 82 vf750c
Ugut to go ivr whole bike oiling or wd40. Also turning rusted or froze nuts. Get apropane torch too for loosening. Project junk bikes taketime but theyr classic. Ihave an 81 yama250..bin workn on it almost20yr. New stuf isjunk. Buy a clymer shop manual for that model...its for rebuild
6/11/2022 4:49:42 AM •
Honda...
•
Answered
on Jun 11, 2022
1980 cb650 c. Power to the plugs. Why no power to the coils?
Possibly 4 things :
1- switch on handle bar is off or bad meaning broken ( open - not making contact) this is a common occurrence.
2- check that you have +12 volts (battery voltage)to one side to your coils with a volt meter when the ignition switch is turned on.
3- remove the wires from the coil and turn the ignition switch on. Check for the +12volts battery power on one side of the coil , you are looking for a shorted coil.
4- remove the coil wires. Using a volt meter set to read ohms on the kw range. Test between the power +12vdc of the coil and a output to the sparkplug. You shoul read ~ 18 kw . A 1ohm or Infinity means the coil is defective. Keeping the meter lead on the +12vdc test the othe ouptput to the other sparkplugs you should get a similar reading. Test between the +12vdc and the - on the coil with the wires removed, you should read around 4 ohms . 1ohm or 20or more is an indication of a bad coil.
Thes are pretty good tests for a coil system in you bike .
Hey I rode a KZ 1000 in the day.
Ok last bug not least you have a bad ignition switch.
So if I can help in any other way get in touch with me.
Harley Charley.
>
3/20/2022 2:02:22 PM •
Honda...
•
Answered
on Mar 20, 2022
Not finding what you are looking for?