20 Most Recent 2005 Harley Davidson VRSCB V-Rod Questions & Answers


Hi Eignacio, take a ride over to your local dealers service department, I'm sure they will be happy to offer advice and assistance concerning your issue. Have a nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 29, 2015


Hi Jack_baugher, for more information on your question please visit the websites below and good luck:
Torque specs 1130cc com The 1 Harley Davidson Rod Forum

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 29, 2015


Hi Anonymous, for more information on your question please visit the websites below and good luck:
Harley Davidson Manuals Mark Workshop

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Harley... | Answered on May 29, 2015


Fuel pressure should remain steady at 380-425 kPa (55-62 psi).

2005 Harley... | Answered on Nov 26, 2014


Check your fuel pressure. If it's low, then check fuel strainer on pump for restriction.

2005 Harley... | Answered on May 03, 2012


on the battery terminals

2005 Harley... | Answered on Oct 30, 2009


Yes. It’s likely that the sprockets are worn. Putting a new chain non a worn pair of sprockets will make the chain wear out faster—and replacing the sprockets without replacing the chain will sear out the sprockets. Do them as a set.

2005 Harley... | Answered on Jan 04, 2009


Hi Jonjones1162, retarded timing and I'm sorry you can't find the very first and best tool you ever bought for your Harley Davidson. Despair not, for a mere $6.50 you may be able to download another one from the website below and good luck.
Harley Davidson Manuals Mark Workshop

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Harley Davidson... | Answered on May 29, 2015


Hi Anonymous, for more information on your question please visit the websites below and good luck:
http://www.stcharlesharleydavidson.com/OEMpartfinder.htm#/Harley-Davidson%C2%AE/VRSCDX_HH_NIGHT_ROD_SPECIAL_(2011)/WHEELS,_REAR/99457-11A%5CHH/99457-11A%5CREAR%7C~WHEEL%5CHH

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Harley Davidson... | Answered on May 29, 2015


Hi Anonymous, it's your on board computers way of saying " you have mail " to retrive mail go to http://www.fuelmotousa.com/harleycodes.html Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Harley Davidson... | Answered on Apr 18, 2015


did you doing the fuelpak settings yourself?
go over the settings list and be sure you have the proper input values ie...stock or high flow air filter.... stcok headers or true duals and which style of V&H pipes you are using.
If you don't have the sheets with the values go to the V&H website and you can enter your data there and download the proper settings
hope that helps

Harley Davidson... | Answered on Jun 17, 2011


'You can go to tradebits.com, payloadz.com or myxmanuals.com to find manuals. They charge between 10-20 dollars but it is an instant download usally in PDF file. I hope this helps you.

Harley Davidson... | Answered on Nov 06, 2010


Hi, Peter for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+1988+Harley+Davidson+Softail&tbm=isch&source=univ&sa=X&ved=2ahUKEwisuvPMqZblAhXqguAKHY3pCccQsAR6BAgHEAE&biw=1440&bih=757
http://www.mediafire.com/file/br4waxbyxcya9zk/84-99_Harley_Softail_Service_Manual.pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://www.harley-davidson.com/us/en/owners/motorcycle-maintenance.html
https://www.6ya.com/ To speak to me personally $6

Harley Davidson... | Answered on Oct 12, 2019


Hi, Aubrey_king try using an automotive brake spring tool also for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
Side stand spring replacement http://www.mediafire.com/file/t7wyadwgyo599ia/1941_Harley_Touring_Service_Manual.zip/file https://www.carlsalter.com/mcpdf/Harley-Davidson-1941-84%20FL%20Models%20Parts%20Catalog.pdf http://www.carlsalter.com/pdfs/Harley_Davidson_FLH%20Electra%20Glide%201970%20Owners%20manual%20v2_2.pdf Instant Repair Help over the Phone to speak to me personally $6

Harley Davidson... | Answered on Oct 11, 2019


Hi, Michael and the usual suspects are:
1. Throttle cables improperly adjusted.
2. Idle screw set too low.
3. Faulty air control valve.
4. Faulty stepper motor.
5. Faulty WAX unit.
6. Faulty MAP sensor.
7. Faulty ECU.
8. Clogged charcoal canister.
9. Fuel pressure too low.
10. Leaking intake rubber hoses between the throttle valve housing and cylinder head.
11. Throttle valves not correctly synced.
12. Throttle position sensor (TPS) not correctly adjusted.
13. Valve clearances are too tight.
14. Low compression.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
https://www.hdforums.com/forum/softail-models/226690-occasional-low-idle-at-stop-engine-dies.html
http://www.mediafire.com/file/6b1dhde35ukpnnc/84+to+98+FL-FX+Harley+Service+Manual.pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://www.6ya.com/ To speak to me personally $6

Harley Davidson... | Answered on Sep 26, 2019


Hi Anonymous, if you have a carbuerator the petcock/fuel valve is located on bottom rear of the left side of the fuel tank. With the long end of the lever pointing straight back the fuel valve is in the off position and no fuel will flow to the carbuerator, with it pointing straight down the valve allows fuel flow from the gas tank to the carbuerator, with it pointing straight forward it is in reserve mode and you have roughly 1/2 to 1 gallon of fuel left in the gas tank. If you are fuel injected the is a low fuel warning light either on the dash or speedometer. If you have a fuel gauge refuel before it hits empty just like your car. Good luck and have nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Harley Davidson... | Answered on Sep 23, 2019


Hi, Allen for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
https://ebcbrakes.com/articles/brake-pad-rattle/
http://www.mediafire.com/file/t1y0e54xjr4tzvu/2010+Harley+Touring+Service+Manual.pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/service/document/6300?highlight=1998+sportster+owner
To speak to me personally $6

Harley Davidson... | Answered on Sep 23, 2019

Not finding what you are looking for?
2005 Harley Davidson VRSCB V-Rod Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

Mike

Level 3 Expert

4363 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

VRSCB V-Rod Harley Davidson

  • VRSCB V-Rod Harley Davidson

Most Popular Question

need cd service manual 2005 vrscb

  • Motorcycles
Loading...